High-Grade Silver in First Hole at Silver King Mine Tasmania
Released
Released
Announcement PDF
JOIN FLYNN GOLD’S INTERACTIVE INVESTOR HUB to interact
with Flynn’s announcements and updates by asking questions or
making comments which our team will respond to where possible
ASX Announcement
9 April 2026
ASX: FG1
ABN 82 644 122 216
CAPITAL STRUCTURE
Share Price: A$0.02
Cash (31/12/25): A$3.45M
Debt: Nil
Ordinary Shares: 608.6M
Market Cap: A$12.2M
Options
Listed (FG1O): 50.6M
Listed (FG1OA): 118.7M
Unlisted Options: 65.5M
BOARD OF DIRECTORS
Clive Duncan
Non-Executive Chair
Neil Marston
Managing Director and CEO
Sam Garrett
Technical Director
John Forwood
Non-Executive Director
COMPANY SECRETARY
Mathew Watkins
CONTACT
Suite 2, Level 11
385 Bourke Street
Melbourne VIC 3000
info@flynngold.com.au
www.flynngold.com.au
Henty Silver-Lead-Zinc Project
High-Grade Silver in First Hole
at Silver King Mine,
Tasmania
Highlights
• Exceptional high-grade silver (up to 2,450g/t Ag) and base metal
mineralisation recorded in assay results for the first diamond drillhole
at Flynn Gold’s Silver King prospect located near Zeehan in Western
Tasmania.
• Significant intercepts in drill hole SKDD001 include:
1.0m @ 1,020g/t (33oz/t) Ag, 15.2% Pb, 4.7% Zn, 0.45% Cu,
0.39% Sb and 0.05 g/t Au from 101.0 m; including:
o 0.4m @ 2,450g/t (79oz/t) Ag, 29.5% Pb, 9.0% Zn, 1.1% Cu,
0.95% Sb, and 0.1g/t Au from 101.2m.
• SKDD001 represents the first hole drilled adjacent to the historical
Silver King mine in approximately 80 years.
• Drilling is ongoing along the 1.6km long Silver King Mine trend with
three drill holes now completed and a fourth recently commenced.
• Additional assay results pending from SKDD001 and all other holes.
• Field mapping and sampling programs are ongoing.
• For further information or to post questions, go to the Flynn Gold Investor
Hub at https://flynngold.com.au/link/yVQYaP
Flynn Gold Limited (ASX: FG1) (“Flynn” or “the Company”) is pleased
to announce the first assay results from its maiden diamond drilling program
at the Silver King Prospect, part of the 100%-owned Henty Silver-Lead-Zinc
Project located near Zeehan in Western Tasmania.
This announcement follows the Company’s release on 20 February 2026
confirming the commencement of the first modern drill testing at the historical
Silver King mine in approximately 80 years. The program is targeting down-
plunge and strike extensions of historically mined high-grade silver-lead-zinc
mineralisation along the 1.6km Silver King mine trend.
Flynn’s Henty Project covers many historical silver-lead-zinc deposits and
mines as well as mineralised zones discovered by more recent exploration,
highlighting the exception prospectivity of the project area (see Figure 1).
Page 2 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Managing Director and CEO Neil Marston commented:
“Receiving this first high-grade result from our maiden hole at Silver King is an exceptional start to
the program. It demonstrates the potential for the historically mined mineralisation to continue at
depth along the Silver King Mine Trend, which runs for 1.6 kilometres through our licence.
“Flynn’s Henty Project contains a multitude of high-grade silver-lead-zinc targets, mostly
associated with historical mine workings, which we are progressively exploring.
“We look forward to completing the remaining holes over the coming weeks and receiving further
assays to better understand the scale and continuity of this exciting high-grade silver-lead-zinc
system.”
Figure 1 – Henty Project Geology and Prospect.
Page 3 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Silver King Mine Trend Drilling
Diamond drilling at the Silver King Mine trend commenced in late February and has progressed
well with three holes (SKDD001-003) completed to date for 610.5m, and a fourth hole (SKDD004)
currently underway (see Figure 2 and Table 1 for details).
This maiden drilling effort by Flynn has concentrated at two historical mining centres along the
trend, namely the historical Silver King and South King – Zeehan Bell mines, located approximately
1km apart. The Silver King Mine trend comprises a north-northwest striking zone of steeply dipping
silver-rich galena-sphalerite fissure veins extending for approximately 1.6km between the historical
Sunrise and Silver King mines.
Figure 2 – Henty Project Silver King Area Location Plan.
Page 4 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
The first assay results from the drilling program have been received. The results represent assays
from partial sampling of diamond drill hole SKDD001, which was prioritised for sampling and assay
following visual observation of semi-massive to massive galena-sphalerite mineralisation zones on
the drill core.
SKDD001 was designed to test the southern extension of high-grade silver-lead ore shoots below
the historical Silver King mine workings, and to provide geological data relating to the orientation
of structures, veining and mineralisation (Figure 3).
Figure 3 – Henty Project Silver King Drill Hole Location Plan.
Page 5 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
SKDD001 successfully intersected zones of structurally controlled sulphide-carbonate veining (see
Table 2 for full details) with the best significant mineralised intercepts including:
SKDD001:
• 1.0m @ 1,020g/t (33oz/t) Ag, 15.2% Pb, 4.7% Zn, 0.45% Cu, 0.39% Sb and 0.05 g/t Au from
101.0 m; including
o 0.4m @ 2,450g/t (79oz/t) Ag, 29.5% Pb, 9.0% Zn, 1.1% Cu, 0.95% Sb, and 0.1g/t Au
from 101.2m
The overall grade and width of the SKDD001 mineralised intercepts are consistent with that
reported from historical mine records at Silver King.
High-grade ore was reported to grade approximately 25–45oz/t (780–1,400g/t) silver at Silver King,
while locally reported grades of up to 100oz/t (3,110g/t) silver were reported1
from high-grade
shoots at South King mine, where drilling is now in progress.
Figure 4 – Silver King prospect 3D section view, looking towards 285o
(WNW).
Historical workings shown (stoped in red, development in brown).
1 Waller, G.A., 1904. Report on the Zeehan silver-lead mining field, Dept. Mines Tasmania Rep. OS 224
Page 6 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Figure 5 – SKDD001 high-grade silver-lead-zinc mineralisation zone (101.0-101.6m) with visible galena-sphalerite.
Next Steps
Drilling is continuing at the Silver King and South King prospects as part of a staged diamond
drilling program of up to six holes for approximately 1,200m.
Further assay results from SKDD001 and the remaining completed holes (SKDD002 and
SKDD003) are expected in the coming weeks and will be released as they become available.
The Company is also progressing field mapping and surface geochemical sampling programs
along the broader 1.6km Silver King Mine trend. Results from these programs, together with the
new drilling data, will be integrated into the geological model to refine targets and guide future
exploration activities at the Henty Silver-Lead-Zinc Project.
Following completion of the initial drilling along the Silver King Mine trend, the rig will move to the
Grieves Siding prospect at Henty South for a short 1-hole drill program.
Page 7 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Table 1: Drill Hole Collar Details
Hole ID Prospect Easting Northing RL Dip Azimuth
Hole Depth
(m)
SKDD001 Silver King 362675 5360420 167 -50 15 224.6
SKDD002 Silver King 362675 5360420 167 -60 68 200.6
SKDD003 South King 363077 5359696 166 -55 10 185.3
SKDD004 South King 363080 5359635 166 -70 50 In-Progress
Note: Collar positions are yet to be accurately surveyed
Table 2: Significant Mineralised Intercepts, SKDD001 (this announcement).
Hole ID
From
(m)
To (m)
Interval
(m)
Ag
(g/t)
Pb
(%)
Zn
(%)
Cu
(%)
Sb
(%)
Au
(g/t)
SKDD001 100.08 102.0 1.92 535 8.3 2.5 0.23 0.21 0.03
including 101.0 102.0 1.0 1020 15.2 4.7 0.45 0.39 0.05
including 101.2 101.6 0.4 2450 29.5 9.0 1.1 0.95 0.10
SKDD001 139.68 142.15 2.47 35.19 0.90 1.18 0.006 0.004 0.01
including 141.74 142.15 0.41 181.8 3.52 1.15 0.01 0.01 0.01
Note: Intervals are reported as downhole width. True width is not yet determined.
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Nicholas Read
Media & Investor Relations
+61 (0) 419 929 046
nicholas@readcorporate.com.au
Page 8 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
About Flynn Gold Limited
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania (see
Figure 6) The Company has ten 100% owned tenements located in northeast Tasmania which are highly
prospective for gold as well as tin and tungsten.
The Company also has the Henty silver-lead-zinc project on Tasmania’s mineral-rich west coast and the
Firetower tungsten, gold and critical metals project located in northern Tasmania.
Flynn has also established a portfolio of exploration assets in the Pilbara and Yilgarn regions of Western
Australia.
For further information regarding Flynn Gold please visit the ASX platform (ASX: FG1) or the Company’s
website www.flynngold.com.au.’
Figure 6 – Location of Flynn Gold tenements in Tasmania.
Page 9 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
In accordance with Listing Rule 5.23.2, the Company confirms in this subsequent public report that it is
not aware of any new information or data that materially affects the information included in any previous
market announcements.
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results, including historical
Exploration Results, is based on information compiled and reviewed by Mr Sean Westbrook, a
Competent Person who is a Member of the Australian Institute of Geoscientists. Mr Westbrook is a
consultant to Flynn Gold and is a shareholder in Flynn Gold. Mr Westbrook has sufficient experience that
is relevant to the style of mineralisation and type of deposit under consideration and to the activity being
undertaken to qualify as a Competent Person as defined in the 2012 Edition of the Australasian Code
for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr Westbrook consents to
the inclusion in this announcement of the matters based on his information in the form and context in
which they appear.
Historical Exploration Results
This announcement includes historical Exploration Results derived from archived government and
company reports relating to mining and drilling conducted in the late 1800s to mid-1900s. These historical
Exploration Results are reported in accordance with the JORC Code (2012), with supporting commentary
provided in the JORC Code Table 1 included in this announcement.
The original sampling, assaying and drilling procedures were not conducted to modern industry
standards and documentation relating to quality control, laboratory methods and sample security is
limited. The Competent Person has not independently verified the original assay certificates or laboratory
procedures associated with the historical data.
The historical information is presented for the purpose of providing context to exploration targeting and
should not be relied upon as an indication of the presence or grade of mineralisation.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
References
FG1:ASX Announcement (Prospectus) dated 15 June 2021
FG1:ASX Announcement dated 19 February 2025
FG1:ASX Announcement dated 20 February 2026
Page 10 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results
Section 1: Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g.
cut channels, random chips, or
specific specialised industry standard
measurement tools appropriate to
the minerals under investigation,
such as downhole gamma sondes, or
handheld XRF instruments, etc.).
These examples should not be taken
as limiting the broad meaning of
sampling.
Sampling relates to diamond drill core from new drill hole SKDD001 at
the Silver King prospect
Half-core samples were collected from HQ sized core over selected
intervals.
Include reference to measures taken
to ensure sample representivity and
the appropriate calibration of any
measurement tools or systems used.
Sampling intervals (0.15m to 0.8m) were defined by geological
boundaries.
Samples are considered representative of the mineralised intervals.
Analyses utilised total digest methods appropriate for sulphide
mineralisation.
All samples were collected by qualified geologists or under geological
supervision.
Aspects of the determination of
mineralisation that are Material to
the Public Report.
The mineralisation referenced in this announcement comprises steeply
dipping, structurally controlled silver-lead-zinc fissure veins hosted
within Silurian Bell Shale. Historical mining grades reflect selectively
mined high-grade material from narrow vein shoots.
The current drilling program is designed to provide an initial modern
test of the mineral system and is not intended to directly validate
historical sampling or assaying procedures.
Drilling
techniques
Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic,
etc.) and details (e.g. core diameter,
triple or standard tube, depth of
diamond tails, face-sampling bit or
other type, whether core is oriented
and if so, by what method, etc.).
Drilling was completed using triple tube diamond core methods (HQ
size) and 3m core barrel.
The core was oriented using a Boart Longyear Truecore UPIX tool.
Drill sample
recovery
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Length based core recovery was measured from reassembled core for
every drill run. Data was recorded into a digital RQD spreadsheet which
was then uploaded to Flynn Gold’s SQL database.
Core recovery was considered high (>95%).
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Triple tube diamond core drilling techniques are used.
The core recovery is logged for each run of drilling and measured
against the drilled length.
Whether a relationship exists
between sample recovery and grade
and whether sample bias may have
occurred due to preferential
loss/gain of fine/coarse material.
No relationship has been noticed between sample recovery and grade.
Page 11 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Logging Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
Logging is considered sufficient to support geological interpretation
and future Mineral Resource estimation studies.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
Logging is qualitative and supported by core photography.
The total length and percentage of
the relevant intersections logged.
All relevant drill core was logged for lithology, alteration, mineralisation
and veining.
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and
whether quarter, half or all core
taken.
Core was cut using a core saw and half-core samples collected.
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
No non-core samples taken.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
The sample preparation technique is considered appropriate for the
style of mineralisation and sample type.
Quality control procedures adopted
for all subsampling stages to
maximise representivity of samples.
Sub-sampling, sample preparation and quality control followed
industry standard procedures.
Measures taken to ensure that the
sampling is representative of the in-
situ material collected, including for
instance results for field
duplicate/second-half sampling.
Half core sampling is considered representative and appropriate for
the style of mineralisation. No field duplicates were sampled for
assaying, however, the remaining half core has been kept in storage
should further check sampling be required.
Coarse rejects and lab-split samples are retained for potential further
QAQC analysis, including check assaying at an independent laboratory.
Whether sample sizes are
appropriate to the grain size of the
material being sampled.
Sample sizes are considered appropriate for the style of mineralisation.
Quality of
assay data
and
laboratory
tests
The nature, quality and
appropriateness of the assaying and
laboratory procedures used and
whether the technique is considered
partial or total.
Samples were analysed at ALS laboratories using a four-acid digest with
ICP-MS finish (ME-MS61) for silver, base metal, and multi-element
determination, and by 30g Fire Assay technique for gold (Au-AA25).
Over-range silver, lead, zinc and copper assays were by OG62 and
OG62h methods. Four-acid digestion is considered near-total for most
base and pathfinder elements but may under-recover elements such
as tungsten and tin where they are hosted in resistant mineral phases.
Tin and tungsten check assays were done by ME-XRF15b method.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make
and model, reading times,
calibrations factors applied and their
derivation, etc.
No such data is reported in this announcement.
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory
checks) and whether acceptable
levels of accuracy (i.e. lack of bias)
and precision have been established.
QA/QC included insertion of certified reference materials, blanks, and
duplicate assays at regular intervals in accordance with industry
standard practices.
Results demonstrate acceptable accuracy and precision.
Page 12 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Verification
of sampling
and assaying
The verification of significant
intersections by either independent
or alternative company personnel.
Significant intersections have been reviewed by company personnel
and the Competent Person.
The use of twinned holes. No twinned drill holes have been completed.
Documentation of primary data, data
entry procedures, data verification,
data storage (physical and
electronic) protocols.
Assay data was received directly from the laboratory and stored in a
validated electronic database. Original laboratory certificates are
stored separately as pdf files.
Discuss any adjustment to assay
data.
The assay data has not been adjusted.
Location of
data points
Accuracy and quality of surveys used
to locate drillholes (collar and
downhole surveys), trenches, mine
workings and other locations used in
Mineral Resource estimation.
New drill collar locations (SKDD001) were surveyed using a handheld
Garmin 64ST GPS (accuracy +/- 5m).
Specification of the grid system used. Grid system used is MGA94 Zone 55.
Quality and adequacy of topographic
control.
Survey accuracy is considered adequate for exploration reporting.
Data spacing
and
distribution
Data spacing for reporting of
Exploration Results.
The new Exploration Results in this announcement refers to one drill
hole (SKDD001). Spacing to the nearest historical drill hole is
approximately 45m.
Whether the data spacing and
distribution is sufficient to establish
the degree of geological and grade
continuity appropriate for the
Mineral Resource and Ore Reserve
estimation procedure(s) and
classifications applied.
Data spacing (new and historical drilling) is considered sufficient to
demonstrate the presence of mineralisation but is not adequate to
define geological or grade continuity and is insufficient to support
Mineral Resource estimation.
No Mineral Resource or Ore Reserve estimates are reported in this
announcement.
Whether sample compositing has
been applied.
No compositing has been applied.
Orientation
of data in
relation to
geological
structure
Whether the orientation of sampling
achieves unbiased sampling of
possible structures and the extent to
which this is known, considering the
deposit type.
Mineralisation is interpreted to be steeply dipping.
Drill hole orientations are considered appropriate for initial testing.
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and reported if
material.
No sampling bias is currently identified.
Sample
security
The measures taken to ensure
sample security.
Samples were transported direct to ALS laboratories in Burnie by Flynn
Gold staff under chain-of-custody procedures.
Sample receipt and verification were completed by the laboratory.
Sample tracking is recorded digitally.
Audits or
reviews
The results of any audits or reviews
of sampling techniques and data.
No independent audits or reviews have been completed.
Internal review and data verification is carried out by the Competent
Person. No material issues have been identified.
Page 13 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Section 2: Reporting of Exploration Results
Criteria JORC Code explanation Commentary
Mineral
tenement
and land
tenure status
Type, reference name/number,
location and ownership including
agreements or material issues with
third parties such as joint ventures,
partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
The Silver King Prospect is located within Exploration Licence
EL3/2018, which is 100% owned by Kingfisher Exploration Pty Ltd, a
wholly owned subsidiary of Flynn Gold Limited.
The tenement is located near Zeehan in western Tasmania. The
licence is in good standing and there are no known material
impediments to exploration activities.
The area includes historical mine workings associated with late 19th
and early 20th century silver-lead mining.
The security of the tenure held at
the time of reporting along with
any known impediments to
obtaining a licence to operate in the
area.
Flynn Gold is unaware of any impediments for exploration on the
granted licences and does not anticipate any impediments to
exploration for the area.
Exploration
done by
other parties
Acknowledgment and appraisal of
exploration by other parties.
Historical mining along the Silver King Trend occurred from the late
1880s to early 1900s, targeting steeply dipping silver-lead fissure
veins. Mining records describe development of underground
workings to depths of approximately 76m at Silver King.
Limited diamond drilling was completed by North Broken Hill Limited
in 1947 beneath the historical workings. The results of this drilling are
derived from archived company reports and drill logs.
The Company has compiled available historical information from
government publications and archived company records for the
purpose of exploration targeting. The historical data has not been
independently verified to modern industry standards.
Geology Deposit type, geological setting and
style of mineralisation.
Mineralisation at the Silver King Trend comprises steeply dipping,
structurally controlled silver-lead-zinc fissure veins hosted within
Silurian Bell Shale and associated sedimentary units. The
hydrothermal vein mineralisation system is related to Devonian aged
granitoid intrusives at depth.
Mineralisation is characterised by galena and sphalerite occurring
within narrow, high-grade shoots developed along north-northwest
striking vein structures.
The style of mineralisation is consistent with vein-hosted Ag-Pb-Zn
systems historically mined in the Zeehan district of western Tasmania,
noting that some of these veins transitioned to Sb- and Sn-bearing
mineralisation with increasing depths.
Drillhole
information
A summary of all information
material to the understanding of
the exploration results including a
tabulation of the following
information for all Material
drillholes:
• easting and northing of the
drillhole collar
• elevation or RL (Reduced Level –
elevation above sea level in
metres) of the drillhole collar
• dip and azimuth of the hole
• downhole length and
intersection depth
• hole length.
New drill hole information pertaining to the Exploration Results is
displayed in table format in the body of the announcement.
Information provided is considered sufficient for understanding the
reported results.
Historical drillhole collar positions, RL, azimuth, dip and downhole
depths for the 1947 North Broken Hill drilling program are presented
below.
Significant historical drill intercepts include:
• DDH-13: 0.15m @ 245.7g/t Ag, 23.8% Pb, 12.3% Zn from 145.39m
• DDH-15: 0.46m @ 547.4g/t Ag, 47.5% Pb, 5.0% Zn from 95.55m
• DDH-16: 0.15m @ 133.7g/t Ag, 14.7% Pb, 5.4% Zn from 42.37m
• DDH-16: 0.15m @ 177.3g/t Ag, 15.6% Pb, 2.5% Zn from 95.71m
• DDH-16: 0.45m @ 102.6g/t Ag, 4.6% Pb, 10.3% Zn from 97.54m
• DDH-16: 0.61m @ 279.9g/t Ag, 14.4% Pb, 5.4% Zn from 99.21m
• DDH-21: 1.22m @ 133.7g/t Ag, 13.3% Pb, 12.9% Zn from 138.99m
• DDH-17: 1.38m @ 37.3g/t Ag, 3.0% Pb, 5.2% Zn from 92.35m
Page 14 of 15 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Historical drillhole collar positions and orientations are presented
below. Coordinate datum is MGA94 Zone 55, azimuth is true, depth
units are meters.
Hole ID Easting NorthingElevation Dip Azimuth Depth
DDH-13 362555 5360620 172 -45 61.5183.2
DDH-14 363015 5359800 168 -45 60.586.9
DDH-15 362630 5360590 169 -54 59.5114.9
DDH-16 362690 5360510 165 -60 64 106.7
DDH-17 363055 5359814 168 -76 60 100.6
DDH-18 363130 5359533 160 -45 51 149.7
DDH-19 362995 5359885 173 -60 58 156.7
DDH-20 363100 5359595 162 -56 57 153.6
DDH-21 363030 5359670 166 -50 57 151.8
DDH-22 363125 5359880 167 -36 234 152.1
Collar positions and orientations have been interpreted from archived
company reports and historical plans. The accuracy of historical
survey data cannot be fully verified.
If the exclusion of this information is
justified on the basis that the
information is not Material and this
exclusion does not detract from the
understanding of the report, the
Competent Person should clearly
explain why this is the case.
Information provided is considered sufficient for understanding the
reported results.
Data
aggregation
methods
In reporting Exploration Results,
weighting averaging techniques,
maximum and/or minimum grade
truncations (e.g. cutting of high
grades) and cut-off grades are
usually Material and should be
stated.
New drill intercepts (SKDD001) are reported as length-weighted
averages. Significant intervals were calculated using a 10g/t Ag cut-
off.
Historical drill intercepts are reported as documented in the 1947
North Broken Hill company reports. The only adjustments undertaken
for the historical results are the mathematical conversion of interval
widths from imperial to metric units and the conversion of silver
grades from ounces per tonne (oz/t) to grams per tonne (g/t) for
reporting consistency.
Where aggregate intersections
incorporate short lengths of high-
grade results and longer lengths of
low-grade results, the procedure
used for such aggregation should
be stated and some typical
examples of such aggregations
should be shown in detail.
Short intercepts of high-grade results that have a material
Share your feedback
Discover