$130,000 in Grant Funding for Drilling at Mangana and Henty
Released
Released
Announcement PDF
ASX Announcement
29 August 2025
Flynn Secures $130,000 in Grant
Funding for Drilling at
Mangana and Henty Projects
Highlights
ASX: FG1
ABN 82 644 122 216
•
Flynn Gold to receive up to $130,000 to co-fund drilling under the
Tasmanian Government’s Exploration Drilling Grant Initiative (EDGI)
•
The funding will support upcoming drill testing at two projects:
Mangana Project – EDGI to co-fund two diamond drill-holes totalling
400m beneath the historic Golden Entrance mine, which produced
2,939oz @ 127g/t Au (~4oz/t) to 1905 1 2; and
Henty South Project – EDGI to co-fund one 500m diamond drill hole
targeting a coincident gravity and IP anomaly north of the Grieves
Siding zinc-lead-silver prospect
CAPITAL STRUCTURE
Share Price: A$0.027
Cash (30/06/25): A$1.2M
Debt: Nil
Ordinary Shares:391.3M
Market Cap: A$10.6M
Options
Listed (FG1O): 50.6M
•
Preparatory activities for drilling are underway
•
For further information or to post questions to management about this
announcement, or any other matter go to the Flynn Gold Investor Hub at:
https://flynngold.com.au/link/eY2wxr
Unlisted Options: 65.5M
Performance Rights: 2.4M
BOARD OF DIRECTORS
Clive Duncan
Non-Executive Chair
Neil Marston
Managing Director and CEO
Sam Garrett
Technical Director
John Forwood
Non-Executive Director
COMPANY SECRETARY
Mathew Watkins
Flynn Gold Limited (ASX: FG1, “Flynn” or “the Company”) is pleased to
advise that it has been successful with two applications in Round 11 of the
Tasmanian State Government’s Exploration Drilling Grant Initiative (EDGI).
The successful applications will support upcoming drill testing for high-grade
gold at the Mangana Project in NE Tasmania and zinc-lead-silver
mineralisation at the Henty South Project in western Tasmania (see Figure 1).
Commenting on the EDGI grants, Flynn Gold Managing Director & CEO, Neil
Marston, said:
“We are delighted to have once again received such strong support from the
Tasmanian State Government through these grants, which are designed to
help uncover the next generation of mineral discoveries in Tasmania.
“Flynn will receive up to $130,000 in EDGI grant funds, supporting the
Company as it drill test targets at its Grieves Siding zinc-lead-silver project
and its Mangana gold project.
CONTACT
Suite 2, Level 11, 385 Bourke
Street, Melbourne,
Victoria, 3000
+61 (0) 3 9692 7222
info@flynngold.com.au
1 Ref: Taheri, J. and Bottrill, R.S., 1994. A study of the nature and origin of gold mineralisation, ManganaForester area, northeast Tasmania. Unpublished Report Tasmania Department of Mines 1994/05.
2
Note: The Golden Entrance production figures are drawn from historic government records (refer to JORC
Table 1 for details). These figures are considered historic in nature and are presented for historical and
geological context only. They are not reported as Exploration Results, Mineral Resources or Ore Reserves
under the JORC Code (2012)
JOIN FLYNN GOLD’S INTERACTIVE INVESTOR HUB
to interact with Flynn’s announcements and updates
by asking questions or making comments which our
team will respond to where possible
“Drilling at Mangana is designed to test beneath the historic Golden Entrance Mine, which
yielded 2,939 ounces of gold at an average grade of over 4 ounces per tonne from shallow
underground workings. Our target zone beneath the old workings has never been drill tested
since the mine closed a century ago.”
Figure 1 – Location of Flynn Gold’s Tasmanian projects
EDGI Program
EDGI is a Tasmanian State Government initiative to co-fund exploration drilling projects. The
aim of the program is to provide a stimulus to greenfield exploration in Tasmania. The
Tasmanian State Government is funding this initiative and the program is administered by
Mineral Resources Tasmania (MRT).
The Company lodged applications with MRT for co-funded drilling at the Grieves Siding
prospect within EL6/2015 (Henty South), and the Golden Entrance prospect within EL2/2019
(Mangana). Both applications were successful for a combined amount of $130,000, to cover
half of the direct drilling costs.
Page 2 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Mangana Project
The Mangana Goldfield is the
most southerly field in the ~80km
long Lyndhurst – Mangana
Golden Corridor of North-east
Tasmania (Figure 1). The corridor
is characterised by tightly folded
Ordovician to Devonian Mathinna
Supergroup sediments, including
strongly cleaved slates and
foliated sandstones with several
generations of quartz veining.
Gold mineralisation throughout
this corridor is hosted by orogenic
lode-style auriferous quartz veins.
Golden Entrance Mine
Historically,
the
Mangana
Goldfield recorded ~6,700oz of
gold production between 1852
and 1910, primarily from the
Mangana Reefs and Golden
Entrance mines 3 (Figure 2).
The Golden Entrance mine was
discovered in 1896 and mined
from 1900-1907, and then with
limited tributing to 1924. It was the
largest and richest producer in the
field, producing 2,939 ounces at
an average grade of 127g/t Au
(4oz/t) to 1905, with grades of up
to 7oz/t 4 recorded. Existing
workings include multiple adits,
shafts and open stopes.
Figure 2 - Mangana Goldfield
Historical records and stope patterns suggest steep north-dipping ore shoots that remain open
and untested at depth, offering a compelling opportunity to confirm continuity and delineate
potentially significant high-grade gold mineralisation.
Two EDGI co-funded diamond drill holes (totalling 400m) are planned at the Golden Entrance
Mine to test for high-grade gold mineralisation beneath the historical workings in a zone that
has not been previously drill tested.
3
Ref: Bottrill, R.S., 1992. Mangana goldfield
and adjacent gold mining areas.
Unpublished
Report
Tasmania
Department of Mines 1992/29
4
Ref: Taheri, J. and Bottrill, R.S., 1994. A study of the nature and origin of
gold mineralisation, Mangana-Forester area, northeast Tasmania.
Unpublished Report Tasmania Department of Mines 1994/05.
Page 3 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Henty Project
Flynn’s Henty Project comprises two Exploration Licences centred on the prospective Gordon
Group Limestone south of Zeehan in Western Tasmania (see Figure 3). The Gordon
Limestone contains a number of carbonate hosted zinc-lead deposits that conform to an Irishtype model. The area also hosts polymetallic skarn and silver-lead fissure lode mineralisation
controlled by the intrusion of Devonian granites.
Irish-type and Mississippi Valley type (MVT) deposits are formed by basin processes, hosted
in carbonate rocks and form a continuum dependent on the temperature of formation with MVT
at the lower temperature end of the spectrum. Irish-type deposits are an attractive exploration
target due to their generally high grade, good lateral continuity and favourable metallurgical
characteristics.
Grieves Siding Prospect
At the Grieves Siding prospect, mineralisation comprises a secondary shallow zone hosted in
near-surface peat and clays and an underlying in-situ stratigraphically controlled zone dipping
moderately to the north within the Gordon Limestone Formation. The in-situ mineralisation is
associated with very strong siderite, ankerite and dolomite alteration.
The mineralised zone at Grieves Siding has been drilled down to about 150 metres below the
surface. It is interpreted that much or all of the mineralisation discovered to date has been
modified by supergene processes in an unusual reducing surface environment caused by the
peat bog which overlies the mineralisation.
In 2018, a five-hole diamond drill program at the Grieves Siding prospect recorded significant
mineralised intersections, including:
•
DD18HG002:
•
•
DD18HG003:
DD18HG005:
9.3m at 7.4% Zn, 0.9% Pb and 5.0 g/t Ag from 103.7m and
3.0m at 3.2% Zn, 3.2% Pb and 16.9 g/t Ag from 140.0m
5.1m at 16.5% Zn, 1.1% Pb and 2.9 g/t Ag from 124m
25.4m at 5.7 % Zn, 0.2% Pb and 0.5 g/t Ag from 93.8m5
More recently, Flynn has reprocessed and remodelled existing ground gravity and Induced
Polarisation (IP) survey data in the Grieves Siding prospect area. This work has identified
several stratabound gravity high features for follow-up exploration work.
One such gravity anomaly located immediately north of the Grieves Siding prospect is partially
coincident with an IP chargeability anomaly and has been highlighted for priority drill testing,
with a co-funded 500m diamond drill hole planned.
Next Steps
The following steps will be completed ahead of the commencement of drilling:
•
•
•
•
5
Signing of the Grant Deeds with the Department of State Growth;
Finalisation of MRT drilling works approval;
Issuing of drilling contract(s); and
Completion of site works ahead of drilling equipment mobilisation.
See FG1 Prospectus ASX announcement dated 21 June 2021 for full details.
Page 4 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Figure 3 - Henty Project Geology and Silver-Lead-Zinc Prospects.
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Nicholas Read
Media & Investor Relations
+61 (0) 419 929 046
nicholas@readcorporate.com.au
Page 5 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
About Flynn Gold Limited
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania and
Western Australia (see Figure 4). The Company has ten 100% owned tenements located in northeast
Tasmania which are highly prospective for gold as well as tin/tungsten.
The Company also has the Henty zinc-lead-silver project on Tasmania’s mineral-rich west coast and
the Firetower gold and battery metals project located in northern Tasmania.
Flynn has also established a portfolio of gold-lithium exploration assets in the Pilbara and Yilgarn
regions of Western Australia.
For further information on the Company and its projects visit: www.flynngold.com.au.
Figure 4 - Location Plan of Flynn Gold Projects
Page 6 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results is based on information
compiled by Mr Sean Westbrook, a Competent Person who is a Member of the Australian Institute of
Geoscientists. Mr Westbrook is a consultant to Flynn Gold and is a shareholder in Flynn Gold. Mr
Westbrook has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Westbrook consents to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
The information in this announcement that relates to historic production at the Golden Entrance Mine is
drawn from government records (refer JORC Table 1). These figures are reasonable as
contemporaneous accounts of mining but cannot be verified against modern QA/QC standards and are
provided for historical and geological context only. They are not reported as Exploration Results, Mineral
Resources or Ore Reserves under the JORC Code (2012).
This announcement includes information that relates to Exploration Results prepared and first disclosed
under the JORC Code (2012) and extracted from the Company’s previous ASX announcements as
noted, and the Company’s Prospectus dated 30 March 2021. Copies of these announcements are
available from the ASX Announcements page of the Company’s website: www.flynnngold.com.au.
The Company confirms that it is not aware of any new information or data that materially affects the
information included within the Prospectus dated 30 March 2021.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
Page 7 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results – Mangana Project
The following JORC Table 1 commentary relates only to historic production records from the Golden Entrance Mine at Mangana, Tasmania.
This table does not apply to other data sets referenced in this release, including exploration results from the Company’s Henty South
prospect, which were reported separately in accordance with the JORC Code (2012) in the Company’s Prospectus announced to the ASX on
21 June 2021.
Section 1: Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as downhole
gamma sondes, or handheld XRF instruments, etc.).
These examples should not be taken as limiting the
broad meaning of sampling.
The sampling described in this release relates to historic
production records from the Golden Entrance Mine. These
figures are collated in:
Include reference to measures taken to ensure
sample representivity and the appropriate
calibration of any measurement tools or systems
used.
Aspects of the determination of mineralisation that
are Material to the Public Report.
•
Blake, F., 1939. Mangana Goldfield. Unpublished
Report, Tasmania Department of Mines, pp. 75–110.
•
Twelvetrees, W.H., 1907. The Mangana Goldfield.
Geological Survey of Tasmania Bulletin No. 1.
•
Barrett, P.H., 1927. Golden Entrance Mine. Mines
Department Report.
The original reports provide very limited information on
sampling procedures. Where descriptions are given, they are
brief, such as:
•
“…crushing yielded…”
•
“(X) tons of ore was crushed for (X) oz. gold (average
X oz/ton…)”
•
“Gold was obtained from crushing and panning.”
These statements indicate that ore was crushed (stamp battery
or dolly pot) and gold recovered by gravity separation using
panning, cradles, Wilfley tables or similar methods common to
the late 19th and early 20th centuries.
Some ore parcels were sent away for treatment. For example,
Twelvetrees (1907) records that stone was sent to the
Bairnsdale School of Mines, which had an assay and furnace
room capable of conducting fire assays for gold. Fire assay was
in regular use in Tasmania by the late 1890s and may also have
been available in Launceston. Reports from adjacent mines,
including Mangana and Argyle note that ore parcels were
treated at local facilities such as the “Old Boys Battery” in
Mathinna. In addition, the New Golden Gate mine at Mathinna
is documented to have operated cyanide treatment facilities,
which may also have been used to process ore from the wider
district.
Importantly, the historic records do not describe measures
taken to ensure sample representivity, nor the calibration of
analytical equipment. Recovery figures represent production
totals reported at the time and cannot be verified against
modern QA/QC protocols.
Accordingly, these production figures should be regarded as
historic records only, not comparable with results generated
under current JORC-compliant procedures.
Drilling
techniques
Drill type (e.g. core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic, etc.)
and details (e.g. core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or
other type, whether core is oriented and if so, by
what method, etc.).
No new drilling reported.
Page 8 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Drill
sample
recovery
Method of recording and assessing core and chip
sample recoveries and results assessed.
No new drilling reported.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Logging
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
Subsampling
techniques and
sample
preparation
If core, whether cut or sawn and whether quarter,
half or all core taken.
If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
Historic production records for the Golden Entrance Mine do
not include geological logs, core recoveries, or systematic chip
records. Ore was generally reported as tons of material crushed
and ounces of gold recovered (Twelvetrees, 1907; Barrett,
1927; Blake, 1939). The figures are therefore considered
production totals only, not verifiable against modern logging
standards.
Historic records provide no information on sub-sampling
techniques or sample preparation. It is therefore not possible
to determine whether sub-samples were taken, how they were
prepared, or whether they were representative. Records are
therefore production summaries only, not equivalent to JORCcompliant sub-sampling.
Quality control procedures adopted for all
subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain
size of the material being sampled.
Quality of assay
data
and
laboratory tests
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total.
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in
determining the analysis including instrument make
and model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures adopted (e.g.
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy
(i.e. lack of bias) and precision have been
established.
Verification of
sampling and
assaying
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry
procedures, data verification, data storage (physical
and electronic) protocols.
Discuss any adjustment to assay data.
Historic production records for the Golden Entrance Mine do
not describe the assay methods or laboratory procedures used.
Contemporary reports (Twelvetrees, 1907; Barrett, 1927; Blake,
1939) record production only in terms of tons of ore treated
and ounces of gold recovered.
No information is available on whether assays were conducted,
what analytical techniques were applied, or whether any
quality control procedures (standards, blanks, duplicates,
external checks) were undertaken.
Accordingly, the reported figures should be regarded as historic
production records that cannot be validated against modern
JORC-compliant analytical or QAQC standards.
The historic production records for the Golden Entrance Mine
do not include information on the verification of results by
independent personnel, the use of twinned holes, or any form
of data entry, storage, or validation protocols.
No adjustments to assay or recovery data are documented, and
it is not possible to independently verify these results against
modern standards. Future drilling planned by the Company is
intended to help test the historical production figures.
Page 9 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Location of data
points
Accuracy and quality of surveys used to locate
drillholes (collar and downhole surveys), trenches,
mine workings and other locations used in Mineral
Resource estimation.
No Mineral Resource estimate has been undertaken for the
Golden Entrance prospect. Historic records provide some
location detail, including mine level descriptions and long
sections showing shafts, adit portals, and mined stopes.
However, the accuracy of these surveys is undocumented and
cannot be validated to modern standards.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data
spacing
and distribution
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s)
and classifications applied.
For current exploration, the Company has employed highresolution LiDAR imagery and handheld GPS to map surface
workings. These datasets provide reliable spatial control, allow
historic long sections to be georeferenced, and support the
planning of future diamond drilling.
Historic production records do not provide information on
sample spacing or distribution. The available data spacing and
distribution is insufficient to support resource estimation.
Whether sample compositing has been applied.
Orientation of
data in relation
to
geological
structure
Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the deposit
type.
Historic production records do not describe the orientation of
sampling or its relationship to geological structures. Sampling
focused on quartz reef material, and it is likely that only highgrade ore was treated and reported.
If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
Sample security
The measures taken to ensure sample security.
Historic production records do not provide information on
measures taken to ensure sample security. Reported figures
relate to ore parcels mined and treated at the time and are not
comparable with modern JORC-compliant sampling
procedures.
Audits
reviews
The results of any audits or reviews of sampling
techniques and data.
No formal audits or reviews of sampling techniques or data are
documented for the Golden Entrance Mine. However, the
historic production figures were compiled and reported by
professional government geologists (e.g. Twelvetrees, 1907;
Blake, 1939), and are considered reasonable as
contemporaneous government records, though not verifiable
against modern JORC standards.
or
Page 10 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Section 2: Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
Type, reference name/number, location and
ownership including agreements or material issues
with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national park
and environmental settings.
The Mangana Project covers a total area of 153km2 under a single
exploration licence, EL2/2019.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
Flynn Gold is unaware of any impediments for exploration on the
granted licence and does not anticipate any impediments to
exploration.
Acknowledgment and appraisal of exploration by
other parties.
All historical exploration records are publicly available via the
Tasmanian Government websites including Land Information
System Tasmania (thelist.tas.gov.au).
Exploration
done by other
parties
The licence is owned and controlled by Flynn Gold through its
100% owned subsidiary, Kingfisher Exploration Pty Ltd.
Previous exploration has been completed on Flynn Gold’s
projects by a variety of companies. Please refer to the FG1
Prospectus dated 30th March 2021 for details and references
relating to previous work.
All historical exploration records are publicly available via the
Tasmanian Government websites including Land Information
System Tasmania (thelist.tas.gov.au).
All work conducted by previous operators at the Mangana project
is considered to be of a reasonably high quality, and done to
industry standards of the day, with information incorporated into
annual statutory reports.
Previous operators have conducted very little exploration work
outside of the historical small scale mine working areas at the
Mangana projects.
Geology
Deposit type, geological setting and style of
mineralisation.
The main exploration target for EL2/2019 is Victorian style,
turbidite hosted orogenic gold deposits. Numerous studies
indicate north-eastern Tasmania can be interpreted to represent
a lateral equivalent of the turbidite dominated fold thrust belt of
the Lachlan Orogen in central Victoria.
The turbidite successions of north-eastern Tasmania are host to
extensive orogenic style gold mineralisation, and numerous
historical goldfields, but are largely unexplored compared to their
Victorian counterparts.
Key exploration targets include quartz ± sulphide veining which is
spatially and genetically coincident with major shear zones
developed in a north-west – south-east orientation. Historical
mine workings clearly delineate these NW trending shear zones.
Please refer to the FG1 Prospectus dated 30th March 2021 for
more details.
Drillhole
information
A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all
Material drillholes:
No new drilling reported.
• easting and northing of the drillhole collar
• elevation or RL (Reduced Level – elevation
above sea level in metres) of the drillhole collar
• dip and azimuth of the hole
• downhole length and intersection depth
• hole length.
Page 11 of 12 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
If the exclusion of this information is justified on the
basis that the information is not Material and this
exclusion does not detract from the understanding
of the report, the Competent Person should clearly
explain why this is the case.
No new drilling reported.
In reporting Exploration Results, weighting
averaging techniques, maximum and/or minimum
grade truncations (e.g. cutting of high grades) and
cut-off grades are usually Material and should be
stated.
No data aggregation or intercept calculations are included in this
release.
Where aggregate intersections incorporate short
lengths of high-grade results and longer lengths of
low grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown in
detail.
No data aggregation or intercept calculations are included in this
release.
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
No metal equivalent values have been reported in this release.
Relationship
between
mineralisation
widths
and
intersection
lengths
These relationships are particularly important in the
reporting of Exploration Results.
No new drilling reported.
If the geometry of the mineralisation with respect to
the drill hole angle is known, its nature should be
reported.
No new drilling reported.
If it is not known and only the downhole lengths are
reported, there should be a clear statement to this
effect (e.g. “downhole length, true width not
known”).
No new drilling r
Share your feedback
Discover