Revised Announcement - Drilling Underway at Warrentinna
Released
Released
Announcement PDF
ASX Announcement
ASX Announcement5 October 2023
19 January 2023
Revised Announcement – Drilling Underway at
Warrentinna Project, NE Tasmania
Highlights
ASX: FG1
Drilling has commenced at the Warrentinna Project testing a highgrade, near-surface gold target zone identified by historical drill
results that include:
o WTR013:
ABN 82 644 122 216
5.0m @ 28.93g/t Au from 36.0m, including
CAPITAL STRUCTURE
o
Share Price: A$0.056
o 2019WTD001:
Cash (30/06/23): A$3.8M
Debt: Nil
Options: 3.4M
The diamond drill program will test highly prospective orogenic-style
gold mineralisation at Warrentinna which is defined by historical
mine-workings over a largely untested 6km-long corridor with
potential for near-surface gold resources
Drilling at Warrentinna is the first in a series of drill programs that will
test high-priority exploration targets across the Company’s regional
exploration projects in Tasmania
Final core samples from recent Trafalgar Prospect drilling at Golden
Ridge Project are being submitted for laboratory analysis this week.
Clive Duncan
Non-Executive Chair
Managing Director / CEO
Sam Garrett
Technical Director
11.7m @ 2.8g/t Au from 115m
BOARD OF DIRECTORS
Neil Marston
2.2m @ 12.0g/t Au from 10.8m
o 2019WTD002:
Market Cap: A$8.18M
Performance Rights: 3.7M
21.7m @ 3.3g/t Au from 9.3m, including
o
Ordinary Shares: 136.4M
1.0m @ 103.25g/t Au from 37.0m
John Forwood
Non-Executive Director
COMPANY SECRETARY
Mathew Watkins
CONTACT
Level 4, 96-100 Albert Road,
South Melbourne,
Flynn Gold Limited (ASX: FG1, “Flynn Gold” or “the Company”) advises
that this announcement is an update of the announcement previously
lodged with the ASX on 27 September 2023 advising of the
commencement of diamond drilling at the Company’s 100%-owned
Warrentinna Project in NE Tasmania. This announcement includes
changes to the JORC Table 1. The Company confirms there are no other
changes to the earlier announcement.
Victoria, 3205
Managing Director and CEO, Neil Marston commented,
+61 (0) 3 9692 7222
“The Warrentinna Project is one of Flynn’s priority gold target areas
within its extensive land holding in northeastern Tasmania.
info@flynngold.com.au
www.flynngold.com.au
“We are delighted to have commenced the Company’s first drilling program at this recently
purchased project where previous campaigns have produced some remarkable, high-grade
drill intercepts. Importantly, the gold mineralisation is near-surface and represents an
opportunity for shallow gold resources
“Outside of the Company’s exciting Golden Ridge Project, this is the first of multiple drilling
programs that Flynn has planned to test across the Company’s regional exploration projects
over the coming months.”
Warrentinna Gold Project
The Warrentinna Project (EL30/2004) is located in north-east Tasmania, 40km northwest of
Flynn’s Golden Ridge Project (see Figure 1). The tenement was recently acquired from
Greatland Gold plc (LSE: GGP, “Greatland”)1.
Figure 1 – Location of Warrentinna Project and other Flynn Gold tenements in northeast Tasmania
1 See FG1 ASX Announcement dated 5 June 2023
Page 2 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
The project encompasses two historic goldfields, Forester and Warrentinna (see Figure 2).
High-grade gold deposits were mined at both fields in the late 1800s and early 1900s. The
Warrentinna goldfield is defined by numerous historic workings and largely untested prospects
over a strike length of 6km.
Figure 2 – Warrentinna Project Geology and Gold Prospects
High-grade gold quartz lodes were previously mined both at surface and underground, at
deposits such as the Golden Mara mine, which produced 3,368oz at an average of 1 oz/tonne2.
Historical drilling results by Greatland in the project area indicate that broad zones of moderategrade gold mineralisation are associated with stockwork veining and quartz breccia styles of
alteration (e.g. 40.0m @ 1.5g/t Au from 10m in drill hole 2018WTD003 – see Figure 3).
2 Blake, F. 1934b. The Golden Mara Mine, Warrentinna. Unpublished Report, Department of Mines, Tasmania.
Page 3 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Figure 3 - Photographed core from historical drill hole 2019WTD003 showing stockwork veining and breccia
mineralisation with gold assays. From zone: 40.0m @ 1.5g/t Au from 10m.
Planned Drill Program
Initial drilling by FG1 at Warrentinna is planned to comprise 2 diamond drill holes totalling
300m. The planned holes will test the continuity and extension of orogenic style gold
mineralisation identified in historical drilling by Greatland. The holes are also designed to
provide stratigraphic and structural information critical to advancing our understanding of the
project.
Page 4 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Previous RC and diamond drilling campaigns at Warrentinna by Greatland intersected zones
of high-grade gold within broader intervals of moderate significant gold mineralisation.
Selected drill holes with high-grade results reported by Greatland are detailed in Tables 1 and
2 (Appendix I) and listed significant intercepts in Table 3 and 4 (Appendix II).
All historical holes drilled by Greatland were orientated dipping steeply towards the east, apart
from 1 RC hole which was drilled towards the north.
Flynn’s planned drill holes will be drilled in the opposite direction, dipping moderately to the
west, with the aim of traversing multiple auriferous quartz vein zones indicated by the previous
drilling, and to provide structural information that was not obtained from the previous drilling
(see Figures 4, 5 and 6).
The final details of the second and any subsequent drill holes will be guided by the core
observations from the first diamond drill hole.
Figure 4 – Warrentinna Project - Drill Hole Plan.
Page 5 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Figure 5 – Cross-section showing historical drill results and Flynn Gold drill hole DNDD001 (in progress).
Golden Ridge Project Update
The processing, logging and cutting of core from the Trafalgar Prospect drilling program
completed in late August 2023 has been completed with the final core samples being submitted
to the laboratory for analysis this week. Assay results from 925m of core from the program will
be reported over the coming weeks.
The soil sampling program at Golden Ridge has also been completed this week.
Page 6 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Figure 6 – Drill rig on current drill hole DNDD001.
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Ben Creagh
Media & Investor Relations
+61 (0) 417 464 233
benc@nwrcommunications.com.au
About Flynn Gold Limited
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania and
Western Australia (see Figure 7). The Company has nine 100% owned tenements located in northeast
Tasmania which are highly prospective for gold as well as tin/tungsten. The Company also has the
Henty zinc-lead-silver project on Tasmania’s mineral-rich west coast and the Firetower gold and battery
metals project located in northern Tasmania.
Flynn has also established a portfolio of gold-lithium exploration assets in the Pilbara and Yilgarn regions
of Western Australia.
For further information regarding Flynn Gold please visit the ASX platform (ASX: FG1) or the Company’s
website www.flynngold.com.au.
Page 7 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Figure 7 - Location Plan of Flynn Gold Projects
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results is based on information
compiled by Mr Sean Westbrook, a Competent Person who is a Member of the Australian Institute of
Geoscientists. Mr Westbrook is a consultant to Flynn Gold and is a shareholder in Flynn Gold. Mr
Westbrook has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Westbrook consents to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
Page 8 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Appendix I
Table 1: Greatland Gold Historical Drilling Summary at Warrentinna
Year
Drill
Type
Number of
Drill holes
Total
metres
Prospect
Hole IDs
2008
RC
12
888
Mara-Golden Dyke
trend
WTR001-012
2010
RC
8
780
Derby North
WTR013-020
2011
RC
7
701
Derby North
WTR021-027
2013
RC
3
300
Derby North
WTR028-030
2014
RC
3
300
Derby North
WTR031-033
2016
RC
3
300
Derby North
WTR034-036
2017
RC
5
496
Derby North
WTR037-041
RC
1
100
Golden Mara
WTR042
DD
3
285
Derby North
2019WTD001-3
2019
Table 2: Greatland Gold 2019 and selected historic drill hole collar details at Warrentinna
Hole ID
Hole
Type
Hole
Depth
Easting
Northing
RL
Prospect
Year
Dip
Azi.
2019WTD001
DD
32
561726
5447557
196
Derby
North
2019
-60
90
2019WTD002
DD
126.7
561733
5447533
196
Derby
North
2019
-60
90
2019WTD003
DD
127
561718
5447555
196
Derby
North
2019
-60
90
WTR013
RC
100
561711.9
5447532.6
240.2
Derby
North
2009
-60
89.8
WTR026
RC
100
561738.9
5447532.3
241.0
Derby
North
2011
-59
88.8
WTR028
RC
100
561724.0
5447553.6
236.5
Derby
North
2012
-60
90
Co-ordinate projection is MGA94, zone 55
Page 9 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Appendix II
Table 3: Greatland Gold significant mineralised intercepts, historical diamond drilling
(2019), Warrentinna
Hole ID
From (m)
To (m)
Interval (m)
Au g/t
2019WTD001
9.3
31
21.7
3.30
incl.
10.8
13
2.2
12.00
incl.
13.2
14.5
1.3
8.50
incl.
15
19.8
4.8
3.80
incl.
22.5
25.5
3
1.50
incl.
26
27
1
1.90
2019WTD002
9.5
12.5
3
0.64
15.5
17.5
2
0.21
25
27
2
0.22
36
37.7
1.7
0.52
62
73.5
11.5
0.61
79
91.65
12.65
1.50
incl.
80.4
81.7
1.3
4.40
incl.
86.5
90.5
4
2.10
98
108
10
2.00
incl.
102
105.5
3.5
4.40
incl.
107
108
1
2.70
115
126.7
11.7
2.80
incl.
116
117.5
1.5
3.50
incl.
118
120
2
3.00
incl.
121.5
125.5
4
4.70
10
53
43
1.5
incl.
31.8
34.3
2.5
5.1
incl.
35
38.7
3.7
3.5
incl.
49
50.5
1.5
4.8
61
62
1
0.74
2019WTD003
Notes:
Reporting Criteria: Intercepts reported as a minimum length of 1m, greater than or equal to 0.2g/t Au, with
maximum internal dilution of 4m and intervals greater than or equal to 1g/t Au with zero metres of internal
dilution. Au is reported to two significant figures.
Results from Greatland announcement dated 4 February 2020.
Historically significant mineralised intervals are reported as downhole lengths, true width is not known.
Page 10 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Table 4: Greatland Gold significant mineralised intercepts, historical RC drilling,
Warrentinna
Hole ID
Prospect
WTR013
Derby North
including
From (m)
To (m)
Interval (m)
Au (g/t)
36
41
5
28.93
37
38
1
103.25
WTR026
Derby North
82
94
12
3.1
WTR028
Derby North
5
31
26
2.32
9
20
11
4.24
including
Notes:
Reporting Criteria: Intercepts reported as a minimum length of 1m, greater than or equal to 0.2g/t Au, with
maximum internal dilution of 4m and intervals greater than or equal to 1g/t Au with zero metres of internal
dilution. Au is reported to two significant figures.
Results from Greatland announcement dated 4 February 2020.
Historically significant mineralised intervals are reported as downhole lengths, true width is not known.
Page 11 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results –
Warrentinna Project
Information on historical prospecting, mining, and exploration activities at the Warrentinna has been
reviewed and verified by the Competent Person. Historical data is considered sufficiently consistent
between generations of past explorers, and sufficiently consistent with recent results, to provide
confidence that compiled and reviewed assay results are indicative of the tenor of the samples. In the
opinion of the Competent Person, sufficient verification of the data has been undertaken to provide
sufficient confidence that past exploration programs were performed to adequate industry standards
and the data reported is fit for substantiating the prospectivity of the projects in general, supporting the
geological model/s proposed, planning exploration programs, and identifying/generating targets for
further investigation.
Section 1: Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
downhole gamma sondes, or handheld
XRF instruments, etc.). These examples
should not be taken as limiting the broad
meaning of sampling.
The sampling described in this report refers to historical
reverse circulation (RC) drilling and diamond (DD) drilling
carried out by Greatland Gold Plc (Greatland), the previous
holders of the tenement.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are Material to the
Public Report.
Samples were all collected by qualified geologists or under
geological supervision.
The samples are judged to be representative of the rock being
drilled.
The nature and quality of sampling is carried out under QAQC
procedures as per industry standards.
2019 Diamond Drilling
Samples consisted of diamond drill core (HQ and NQ sizes)
cut in half.
All available core was cut and sampled. Sampling interval
was generally 1m or 0.5m but respects geological contacts in
places. Sampling was carried out to Greatland’s internal
protocols and QAQC procedures.
Entire samples were crushed then pulverised to a nominal
85% passing 75 microns. The resulting pulps were analysed
for Au (50g charge, fire assay) and multi-element
geochemistry (four acid digest ICP-MS).
Locations and orientation of 2019 drill holes for this release
are tabulated in Appendix I.
Historic RC Drilling
RC sampling was carried out using Greatland’s internal
protocols and QAQC procedures.
One metre samples were collected from the cyclone into a
plastic bucket and laid out generally in rows of 50.
Initial RC samples were composited to 4m lengths via 'spear'
sampling of individual 1m intervals. Samples were then
taken to the laboratory and pulverised.
Anomalous intervals were subsequently re-samples and reassayed on a 1m basis by riffle splitting.
Drilling
techniques
Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc.) and details
(e.g. core diameter, triple or standard
2019 Diamond Drilling
Drilling was undertaken using a track mounted Coretech
CSD1800 drill rig. The drill rig is capable of ~1000m NQ.
Page 12 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
tube, depth of diamond tails, facesampling bit or other type, whether core
is oriented and if so, by what method,
etc.).
Drill holes were cased with HWT casing to ~3m. HQ sized drill
core from 0m to ~20m followed by NQ drill core from 20m
to end of hole.
Historic RC Drilling
Drilling was undertaken using a track mounted RC drill rig.
RC Drill holes - 134mm face sampling RC bit to end of hole.
Drill sample
recovery
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
2019 Diamond Drilling
Length based core recovery was measured from reassembled
core for every drill run. Data was recorded into laptop
computer using 'LogChief' - geological logging software.
Core recovery was considered high (93%). The drilling
method employed, including triple tube technique, lead to
satisfactory core recoveries.
Historic RC Drilling
RC sample recovery and quality was recorded via visual
estimation of sample volume and the condition of drill spoils.
Recovery ranged from 90-100%, with only occasional
recoveries of less than 70%. Sample recovery was maximized
by maintaining dry samples (dry drilling conditions) as much
as possible.
Due to consistently high recoveries, no relationship between
grade and recovery is evident.
Logging
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
2019 Diamond Drilling
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
Logging is recorded directly into a laptop computer using
'LogChief' - geological logging software. This software has 'lookup tables' that do not allow for invalid entries. Additional
validation is then carried out when data is transferred to
Greatland’s database managers.
The total length and percentage of the
relevant intersections logged.
All drill core/samples were geologically logged for lithology,
mineralogy, alteration, veining, sulphide occurrences, structure
and geotechnical data. This logging includes both qualitative
and quantitative components. All core is digitally
photographed.
All samples are analysed in the field using a pXRF (Olympus
Vanta handheld - model VMR) for the purpose of geochemical
interpretation.
All core is analysed in the field using a Minalyze unit. This
collects ultra-high-resolution photography, and continuous XRF
measurements.
Historic RC Drilling
All RC drill samples were geologically logged for lithology,
mineralogy, alteration, veining and sulphide occurrences. This
logging includes both qualitative and quantitative components.
Samples were logged at 1m intervals.
Logging was both qualitative and quantitative in nature.
Page 13 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
2019 Diamond Drilling
If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
All sampled core was cut with a core saw in a consistent way
that preserved the bottom of hole reference line, where
present. Sampling interval is generally 1m or 0.5m but
respects geological contacts in places.
Sample preparation included drying, crushing and pulverising
in full to a nominal 85% passing 75 microns.
Quality control procedures adopted for
all subsampling stages to maximise
representivity of samples.
All staff were adequately trained for all sampling steps, with
geologists checking sample sheets prior to loading into the
database.
Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
The sample sizes are considered appropriate for the style of
mineralisation encountered in the region.
Whether sample sizes are appropriate to
the grain size of the material being
sampled.
One metre samples were collected from the cyclone into a
plastic bucket and laid out generally in rows of 50.
No field duplicate samples were collected/reported.
Historic RC Drilling
RC samples were composited to 4m lengths via 'spear'
sampling the individual 1m intervals.
RC sample preparation was completed at Genalysis
Laboratory in Adelaide using industry standard procedures
(dry, crush and pulverise for 85% at 75µm). This sample is
then split into sub-samples for analysis.
The sample sizes are considered appropriate for the style of
mineralisation encountered in the region.
Page 14 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
2019 Diamond Drilling
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Au analysis - 50g Fire Assay/ICP-OES (detection limit of
0.005ppm).
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
All samples were submitted for preparation at Intertek
laboratory Adelaide. Pulp samples were then submitted for
analysis to Intertek Perth Laboratory.
Multi-Element analysis - four acid digestion ICP-MS (for Ag,
Al, As, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, Ge, Hf, In,
K, La, Li, Mg, Mn, Mo, Na, Nb, Ni, P, Pb, Rb, Re, S, Sb, Sc, Se,
Sn, Sr, Ta, Te, Th, Ti, TI, U, V, W, Y, Zn, Zr).
Quality Control procedures in the field involve the use of
certified reference material (CRM's) for assay standards and
blanks. Standards and blanks are inserted every 20 samples.
No field duplicates have been collected/reported.
Historic RC Drilling
All samples were dried, crushed and pulverised to produce
suitable sub-samples for Au analysis (via Fire Assay).
Au analysis - 50g Fire Assay/AAS (detection limit of
0.005ppm).
No geophysical tools were used for any element
concentrations in this report.
All samples are analysed in the field using a pXRF (Olympus Mseries) for the purpose of geochemical interpretation. This data
is for internal company use only.
Verification
of sampling
and assaying
The verification of significant
intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Significant intersections have been verified by multiple
company personnel.
Three diamond drill holes were designed to twin RC holes from
a historic RC drilling program.
2019 Diamond Drilling
Logging is recorded directly into a laptop computer using
'LogChief' - geological logging software. This software has 'lookup tables' that do not allow for invalid entries. Additional
validation is then carried out when data is transferred to
Greatland’s database managers.
No adjustments have been made to any assay data.
Primary assay data is stored in its electronic form and retained
in both original certificate form (.pdf) and text/.csv files.
Historic RC Drilling
Primary data documentation via Greatland’s internal protocols.
Data validation carried out via Greatland's database managers.
No adjustments have been made to any assay data.
Page 15 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Location of
data points
Accuracy and quality of surveys used to
locate drillholes (collar and downhole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
2019 Diamond Drilling
Specification of the grid system used.
Down hole surveys were conducted every 30m using an Axis
Champ Discover survey tool.
Quality and adequacy of topographic
control.
Drill hole collar locations were surveyed using a handheld
Garmin 64ST GPS (accuracy of ± 5m).
All coordinates are in MGA94 Zone55.
Topographic control of drill collars utilises handheld GPS
information.
Historic RC Drilling
Drill hole collar locations were surveyed using a handheld
GPS (accuracy of ± 5m).
All coordinates are in MGA94 Zone55.
RL is measured using a handheld GPS.
Inclined RC drill holes are checked for drill rig set-up azimuth
using a Suunto Sighting compass.
Inclination of drill holes is set by the driller using a clinometer
on the mast of the drill rig.
All coordinates are in GDA94 Zone55.
Data spacing
and
distribution
Data spacing for reporting of Exploration
Results.
Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Whether sample compositing has been
applied.
Drill hole collar locations were surveyed using a handheld
GPS (accuracy of ± 5m).
2019 Diamond Drilling:
Drill planning designed to twin RC holes from a historic RC
drilling program.
Sampling interval is generally 1m or 0.5m, but respects
geological contacts in places.
There was no sample compositing.
Historic RC Drilling
Downhole 4m composite samples.
Mineralised intersections then re-assayed as 1m samples.
Historic drilling was of an ad-hoc nature, with average section
spacing of ~50m (in the Derby North area), although holes have
been drilled both to the north and south so continuity of
geological information collected has been sparse.
Data spacing is not sufficient for the reporting of Mineral
Resources.
Orientation
of data in
relation to
geological
structure
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
2019 Diamond Drilling
Strike of local geology not readily understood.
No relationship is known between key mineralizing structures
and the orientation of drilling.
There is presently insufficient information to confirm the true
thickness of any mineralised intervals.
Historic RC Drilling
Strike of local geology not readily understood.
No relationship is known between key mineralizing structures
and the orientation of drilling.
There is presently insufficient information to confirm the true
thickness of any mineralised intervals.
Page 16 of 20 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
Sample
security
JORC Code explanation
Commentary
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
From the information available, no sampling bias issues have
been identified to date.
The measures taken to ensure sample
security.
2019 Diamond Drilling
Samples were freighted to the Laboratory using Greatland’s
chain of custody protocols which are considered to be industry
standard.
Verification of sample numbers and identification is conducted
by the laboratory on receipt of samples, and sample receipt
advis
Share your feedback
Discover