Shallow High-Grade Gold-Tungsten-Cobalt at Firetower Project
Released
Released
Announcement PDF
JOIN FLYNN GOLD’S INTERACTIVE INVESTOR HUB
to interact with Flynn’s announcements and updates
by asking questions or making comments which our
team will respond to where possible
ASX Announcement
30 October 2025
ASX: FG1
ABN 82 644 122 216
CAPITAL STRUCTURE
Share Price: A$0.022
Cash (30/09/25): A$0.38M
(plus $5.0M raised in Oct 25)
Debt: Nil
Ordinary Shares:608.6M
Market Cap: A$13.4M
Options
Listed (FG1O): 50.6M
Listed (FG1OA): 108.7M
Unlisted Options: 65.5M
BOARD OF DIRECTORS
Clive Duncan
Non-Executive Chair
Neil Marston
Managing Director and CEO
Sam Garrett
Technical Director
John Forwood
Non-Executive Director
COMPANY SECRETARY
Mathew Watkins
CONTACT
Suite 2, Level 11
385 Bourke Street
Melbourne VIC 3000
info@flynngold.com.au
www.flynngold.com.au
High-Grade Gold-Tungsten-Cobalt
Identified Near Surface at Firetower
Project
Highlights
• Re-sampling and assaying of historical drill core yields wide, high-grade
gold-tungsten intercepts from near surface including:
GP-90-10
17m (7-24m) @ 4.1g/t Au, 0.21% WO3 and 0.04% Co, including
o 6m @ 9.27g/t Au, 0.59% WO3 and 0.08% Co from 7m, including
o 3m @ 17.20g/t Au, 1.10% WO3 and 0.02% Co from 10m
• 92% increase in tungsten assay to project-wide best of 17 metres
@ 0.73% WO3 in hole 2019FTD007E when samples were re-assayed
using a more accurate laboratory method, upgrading the result to:
2019FTD007E
17m (121-138m) @ 2.3 g/t Au, 0.73% WO₃, 0.16% Co and 0.16%
Cu including:
o 1.7m @ 6.64g/t Au, 1.08% WO3, 0.13% Co and 0.14% Cu from
121.0m
o 3.8m @ 2.18g/t Au, 0.88% WO3, 0.27% Co and 0.10% Cu from
126.2m, and
o 5.5m @ 3.27g/t Au, 0.61% WO3, 0.24% Co and 0.33% Cu from
132.5m
• Re-sampling of remaining historical drill core will accelerate over the
coming weeks, targeting a Mineral Resource Estimate in H1 CY2026
• Latest results further highlight the potential for gold, tungsten and
cobalt mineralisation to extend along strike and at depth at Firetower
• The 100%-owned Firetower Project is hosted in the prolific Mount Read
Volcanic Sequence in NW Tasmania, with excellent access to mining
services and infrastructure
• Tungsten and cobalt are classified as “critical metals” essential for the
global energy transition and currently in high demand globally
• For further information or to post questions go to the Flynn Gold Investor
Hub at https://flynngold.com.au/link/ejYMxy
Page 2 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Flynn Gold Limited (ASX: FG1, “Flynn” or “the Company”) is pleased to report further
significant results from the ongoing re-sampling of historical drill core from the Company’s
100%-owned Firetower Project, located in northwest Tasmania (see Figure 5).
The shallow intercept of re-sampled drill hole GP-90-10 together with the revised intercept in
2019FTD007E are shown with other historical intercepts in the cross-section (Figure 1) below.
Figure 1 –Cross Section with preliminary 3D model of the Firetower Prospect (looking east).
Managing Director and CEO, Neil Marston commented:
“The re-assaying of historical drill core has delivered more high-grade gold-tungsten-cobalt
intercepts that confirm the continuity of polymetallic mineralisation at Firetower. Importantly,
the wide zone of gold and critical metals mineralisation extends to a depth of 150 metres from
surface and remains open both along strike and at depth.
“We have also adopted a new analytical method to assess the high-grade tungsten content
that mainly occurs in the form of scheelite. This analytical change increased the tungsten assay
result by 92% in one hole to 0.73% WO3 over a 17-metre interval. Given this significant result,
we will now apply this new assaying method wherever we record anomalous tungsten assays.
“In light of the recent surge in tungsten prices amid escalating global trade barriers, the
Company is accelerating exploration activities at this increasingly high-value asset, with the
aim of delivering a maiden Mineral Resource Estimate during the first half of next year.”
Page 3 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Historical Drill Core Re-Sampling
Results have been received from re-sampling and assaying of selected drill core from four
historical holes, namely:
• GP-90-01 - historical gold intercept of 25m @ 1.95g/t Au from surface1
• GP-90-02 - historical gold intercept of 26m @ 0.64g/t Au from surface1
• GP-90-10 - historical gold intercept of 17m @ 5.37g/t Au from 7 metres2
• FTD040 - historical gold intercept of 20m @ 1.06g/t Au from 135 metres3
The new assay results were derived from quarter-core sampling of the remaining TT46 or NQ
half-core kept at the Department of State Growth core storage facility in Hobart.
Additionally, pulps from drill hole 2019FTDD007E were sent for re-assay using the lithium
borate fusion followed by X-ray fluorescence process (XRF15b method), which provides a total
digest suitable for scheelite and other tungsten-bearing minerals, thereby enabling more
accurate determination of tungsten grades in mineralised zones.
The resampled drill hole details are shown in Table 1 and significant re-sampling results are
shown in Table 2. The locations of GP-90-10 and 2019FTD007E are shown in Figure 2.
Historical Drill Holes
Drill holes GP-90-01, GP-90-02 and GP-90-10 were part of a series of 30m diamond drill holes
testing mineralisation and alteration identified at surface by Noranda Pty Ltd in 1990.
FTD040 was drilled in 2012 as part of a 5-hole diamond drilling program. FTD040 confirmed
the existence of gold mineralisation at depth in the western section of the Firetower deposit.
Other historical near surface and high-grade intercepts located between GP-90-10 and
2019FTD007E as shown in Figure 1 include:
• FTD005 – 28m @ 2.4g/t Au, including 11m @ 4.0g/t Au, 0.24% WO3, 0.05% Co and
0.25% Cu for 38m4
• FTD013 - 14m @ 2.91g/t Au, 0.24% WO3, 0.14% Co and 0.25% Cu from 33m5
• FTD014 - 11m @ 2.4g/t Au, 0.09% WO3, 0.12% Co and 0.02% Cu from 1m6
, and
• 2019FTD011 – 13.5m @ 2.44g/t Au, including 2.5m @ 5.92g/t Au, 0.23% Co, 0.01% WO3
and 0.15% Cu from 59.5m7
.
Holes FTD005 and 2019FTD2011 will be re-sampled for tungsten analysis shortly.
1
Jones, P.A. 1991. Exploration Licence No. 10/88 - Gowrie Park Progress Report on Exploration Activity August
1989 to July 1990. Noranda Pty Ltd. MRT open file report 91_3231.
2
Jones, P.A. 1991. Exploration Licence No. 10/88 - Gowrie Park Progress Report on Exploration Activity August
1990 to July 1991. Noranda Pty Ltd. MRT open file report 91_3290.
3
Evans, D.A. 2012. Annual Report for EL26/2004 for the period November 2011 – November 2012. Unity Mining
Ltd. MRT open file report _6670
4
Callaghan, T. 2002. Annual Report EL12/2001 for the period September 2001 – August 2002. Auriongold
Exploration. MRT open file report 02_4766
5 See FG1 ASX Announcement date 27 October 2023 for full details.
6
McLean, G., Baxter, C. 2006. Annual Report for EL26/2004 and EL31/2004 for the period November 2005 –
October 2006. Greatland Pty Ltd. MRT open file report 06_5311
7
Greatland Gold plc Regulatory News Announcement dated 17 December 2019
Page 4 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
The mineralisation at Firetower remains open along strike and at depth, as shown by selected
historical intercepts in Figure 2, highlighting the scope for extensions through future drilling.
Figure 2 - Firetower Prospect Drill Hole Location Plan.
Analytical Techniques
The 4-acid digest (HF-HNO3-HClO4-HCl) method is a commonly used laboratory method
suitable for the dissolution of most silicate, oxide and sulphide minerals. However, this
digestion is considered a partial digestion for tungsten (W), particularly where tungsten is
hosted in scheelite (CaWO4) or other minerals that are not completely dissolved by 4-acid
attack under standard conditions.
As such, tungsten assay values from the 4-acid digest method are considered preliminary only,
and may under-report total tungsten content in samples containing scheelite or other resistant
W-bearing phases.
Page 5 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Follow-up assay programs will now incorporate lithium borate fusion followed by XRF method
(XRF15b) for tungsten, which provides a total digest suitable for scheelite and other refractory
W-bearing minerals, thereby enabling more accurate determination of tungsten grades in
mineralised zones.
In the case of recent drill hole 2019FTD007E, the mineralised zone was re-assayed using the
more accurate XRF15b method, recording an average 92% increase in the tungsten assay
from 0.38% WO3 to 0.73% WO3 over a 17-metre interval.
For some individual intervals where significant scheelite mineralisation was clearly visible
under ultraviolet (UV) light, the XRF15b method recorded increases well above the average.
For example, the 2019FTD007E interval between 129.5m – 130.0m assayed 1.02% WO3 by
4-acid digest method and 3.79% WO3 using the XRF15b method, which is a 272% increase
in the WO3 grade (see Figures 3 and 4 below).
It is understood that most of the earlier drilling programs used the 4-acid digest method to
determine tungsten grades.
Figure 3 – Mineralised carbonate-pyrite-arsenopyrite-cobaltite-scheelite vein (2019FTD007E, 129.8m)
(Interval 129.5-130.0m Assay: 0.5m @ 6.64g/t Au, 0.38% Co, 3.79% WO3, 0.11% Cu).
Figure 4 – Same segment of drill core (2019FTD007E, 129.8m) under ultraviolet light,
highlighting intense scheelite (CaWO4) mineralisation (blue) (Interval 129.5-130.0m
Assay: 0.5m @ 6.64g/t Au, 0.38% Co, 3.79% WO3, 0.11% Cu).
Page 6 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Next Steps
Following the signing of the joint US-Australia Critical Minerals Framework last week, and with
bullish price moves in the global tungsten market8
, the Firetower Project now takes on greater
significance within Flynn’s asset portfolio.
The following activities are planned:
1. Fast-tracking the re-sampling and assaying of historical drill holes for tungsten, including
re-assaying selected mineralised zones using the XRF15b method;
2. Metallurgical testwork to determine potential methods for processing and extraction of
tungsten, cobalt and gold;
3. Remodelling the deposit to identify follow-up drill targets; and
4. Calculation of an initial Mineral Resource Estimate and potential Exploration Target in H1
CY2026.
Importance of Cobalt and Tungsten
Tungsten is considered one of the most critical minerals due to its importance across a wide
range of applications in various fields and its inability to be substituted in many of these
applications due to its high melting point and hardness.
Global tungsten demand has been rising due to supply side constraints after China initiated
export controls earlier in 2025, driving price growth.
These latest assay results continue to demonstrate the polymetallic nature of the
mineralisation at Firetower, with the critical metals tungsten, cobalt and copper occurring with
gold and potentially representing valuable co-products beyond its established gold
endowment.
Cobalt is a critical mineral with increasing demand as a key manufacturing component in the
global shift toward clean technologies. With approximately 70 percent of global cobalt
production coming from the Democratic Republic of Congo, the world is seeking alternative
sources of this battery metal, particularly from Tier-1 jurisdictions with strong ESG credentials
such as Australia.
The association of gold with these metals adds significant potential value to the project,
broadening its economic and strategic importance.
Firetower Project Background
The Firetower Project (EL26/2004) is located in northwest Tasmania, Australia, and covers an
area of 62 square kilometres.
The project lies in the north-eastern end of the highly mineralised Mt Read volcanic sequence,
which hosts major polymetallic base metals and gold deposits such as Hellyer and Rosebery,
copper-gold deposits such as Mt Lyell and the Henty gold mine (Figure 5).
8
Shanghai Metals Market (SMM) Tungsten Daily Review dated 27 October 2025
Page 7 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Figure 5 – Location of Flynn Gold’s NW Tasmanian Projects
Historical exploration in the Firetower Project area, beginning in the 1970s, was largely gold
focused. Anomalous cobalt and tungsten were noted by previous explorers but generally not
followed up due to the gold-focused exploration models applied at the time.
Inconsistent sampling protocols and assay techniques over several historical drilling
campaigns led to large gaps in the understanding of the distribution and nature of the
polymetallic mineralisation at Firetower.
The polymetallic Au-Co-W-Cu mineralisation at the Firetower Prospect is currently defined
over a strike length of 250m and to depths of 150m from surface (open).
The prospect is situated within a highly prospective 6km-long trend between the Firetower
West and Firetower East prospects (Figure 6).
Page 8 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Figure 6 – Firetower Project Simplified Geology And Gold Prospects
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Nicholas Read
Media & Investor Relations
+61 (0) 419 929 046
nicholas@readcorporate.com.au
Page 9 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Appendix I
Table 1: Re-sampled drill hole collar details (this announcement), Firetower prospect
Hole ID
Hole
Type
Hole
Depth (m)
Easting Northing RL Dip
Azimuth
UTM
2019FTD007E DD 181.8 446123.1 5405243.2 628.42 -60 0
FTD040 DD 339.5 445980.5 5405144.5 541.41 -62 358
GP-90-01 DD 24.7 446094.4 5405320.9 641.15 -90 0
GP-90-02 DD 25.8 446074.7 5405323.4 635.78 -90 0
GP-90-10 DD 30.25 446112.8 5405317.4 644.47 -45 174
Table 2: Significant Polymetallic Mineralised Intercepts for Firetower Re-Sampled Drill Holes
Hole ID From (m) To (m)
Interval
(m)
Au g/t Co % Cu % WO3 %
2019FTD007E 121 138 17 2.31 0.16 0.16 0.73
including 121 122.7 1.7 6.64 0.13 0.14 1.08
including 126.2 130 3.8 2.18 0.27 0.1 0.88
including 132.5 138 5.5 3.27 0.24 0.33 0.61
FTD040 132 133 1 0.81 0.15 0.06 0.16
135 136 1 0.4 0.14 0.002 0.12
139 140 1 3.91 0.09 0.002 0.65
145 149 4 0.76 0.14 0.003 0.03
GP-90-01 0.3 4 3.7 2.35 0.02 0.05 0.21
7 8 1 2.54 0.01 0.03 0.19
GP-90-02 7 10 3 0.44 0.03 0.02 0.15
GP-90-10 7 24 17 4.06 0.04 0.1 0.21
including 7 13 6 9.27 0.08 0.26 0.59
including 10 13 3 17.20 0.02 0.47 1.10
Notes:
• Significant intercepts for polymetallic (Au-Co-W-Cu) mineralisation in this announcement used a cut-off grade of 0.3g/t
Au with a polymetallic component of at least 0.1% Co and/or 0.1% WO3. Maximum of 2m internal dilution accepted.
• Single-element significant mineralised intervals were not calculated.
• Cu values in italics are from historical assays
• Reported grades are calculated as length-weighted averages.
• Significant mineralised intercepts are reported as downhole lengths, true widths are currently unknown.
Page 10 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
About Flynn Gold
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania and
Western Australia (see Figure 7) The Company has ten 100% owned tenements located in northeast
Tasmania which are highly prospective for gold as well as tin/tungsten.
The Company also has the Henty zinc-lead-silver project on Tasmania’s mineral-rich west coast and
the Firetower gold and critical metals project located in northern Tasmania.
Flynn has also established a portfolio of gold-lithium exploration assets in the Pilbara and Yilgarn regions
of Western Australia.
For further information regarding Flynn Gold please visit the ASX platform (ASX: FG1) or the Company’s
website www.flynngold.com.au.’
Figure 7 – Location Plan of Flynn Gold Projects
Page 11 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results is based on information
compiled by Mr Sean Westbrook, a Competent Person who is a Member of the Australian Institute of
Geoscientists. Mr Westbrook is a consultant to Flynn Gold and is a shareholder in Flynn Gold. Mr
Westbrook has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Westbrook consents to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
This announcement includes information that relates to Exploration Results prepared and first disclosed
under the JORC Code (2012) and extracted from the Company’s previous ASX announcements as
noted, and the Company’s Prospectus dated 30 March 2021. Copies of these announcements are
available from the ASX Announcements page of the Company’s website: www.flynnngold.com.au.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
References
FG1: ASX Announcement dated 1 December 2022
FG1: ASX Announcement dated 5 June 2023
FG1: ASX Announcement dated 27 October 2023
FG1: ASX Announcement dated 22 January 2024
FG1: ASX Announcement dated 26 March 2024
FG1:ASX Announcement dated 1 October 2025
Page 12 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results – Firetower Project
Section 1: Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
downhole gamma sondes, or handheld
XRF instruments, etc.). These examples
should not be taken as limiting the broad
meaning of sampling.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are Material to the
Public Report.
The sampling described in this report refers to re-sampling of
historical diamond drill core from the MRT core library in
Mornington, Tasmania.
Drill hole FTD040 drilled by Greatland Gold Plc in 2012.
Drill holes GP-90-01, GP-90-02 and GP-90-10 were drilled by
Noranda Pty Ltd in 1989 to 1991.
The sampling was carried out on available half core over a selected
downhole interval, which was cut and one side of quarter core
taken as the sample.
Samples consisted of TT46 (GP-90 series holes) and NQ size
diamond (FTD040) drill core, cut in half. All available core was cut
and sampled. Sampling intervals were a minimum of 0.3 m and a
maximum of 1.3 m (internal core loss). Where samples were not
at 1.0 m, the sample intervals were constrained by geological
boundaries.
2019FTDD07E was drilled by Flynn Gold in 2023. Selected
laboratory pulps from this drillhole were resubmitted for assaying
using the XRF15b method.
All samples were collected by qualified geologists or under
geological supervision. The samples are judged to be
representative of the rock drilled. The nature and quality of the
sampling is carried out under QA/QC procedures as per industry
standards.
Drilling
techniques
Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc.) and details
(e.g. core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
etc.).
Historical drilling technique was diamond core. Core was not
oriented, and no use of triple tube is recorded in original drill logs
and reports.
Sampling results reported in this announcement refer to re-
sampling of TT46 (GP-90 series holes) and NQ sized (FTD040)
quarter core.
2019FTDD07E - Drilling was undertaken using a track mounted
Coretech CSD1800 drill rig. The drill rig is capable of approx. 1000
m NQ. A NQ sized diamond tail was added to the diamond hole
that was drilled previously by Greatland in 2019.
Drill sample
recovery
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
No core recovery logs are available for the historical drill hole
FTD040, GP-90-01, GP-90-02 and GP-90-10. However, visual
inspection of the drill core prior to re-sampling indicates that core
recovery was generally good and within acceptable limits.
Other drill holes at the Firetower prospect with available core
recovery information generally show excellent core recovery,
typically 100% but varying in the range of 95-100%.
Information on measures taken to maximise sample recovery is
not available, however, industry standard procedures were likely
to have been implemented considering the professional standards
of the exploration and drilling companies involved.
Page 13 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Logging Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
The total length and percentage of the
relevant intersections logged.
Historical drill hole FTD040 was geologically logged for lithology,
alteration, mineralisation, and veining. The core was
photographed.
Historical drill holes GP-90-01, GP-90-02 and GP-90-10 were
geologically logged for lithology mineralisation and veining.
Flynn Gold geologists have reviewed historical geological logging
and consider it to have been done to appropriate standards and
levels of accuracy to support future geological and Mineral
Resource estimation studies. Lacking geotechnical information is
likely to preclude use for all mining studies.
Multiple historical drill core from the Firetower prospect is held at
the Mineral Resources Tasmania core library and are available for
inspection. Multiple holes have been inspected by Flynn Gold
geologists.
2019FTDD07E - was geologically logged for lithology,
mineralisation, veining, alteration, structure and geotechnical
data. Logging included qualitative and quantitative components.
All core was digitally photographed. Log and photographs are of
satisfactory detail to support any future mineral resource
estimation. Logging was recorded into an excel template then
transferred to Flynn Gold’s SQL database.
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and whether
quarter, half or all core taken.
If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
Quality control procedures adopted for
all subsampling stages to maximise
representivity of samples.
Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
Whether sample sizes are appropriate to
the grain size of the material being
sampled.
Sampling results reported in this announcement refer to re-
sampling of TT46 (GP-90 series holes) and NQ sized (FTD040) half
core. The core was cut with an automated core saw or where core
was broken with a hand operated core saw to keep sample loss to
a minimum.
Sampling intervals were a minimum of 0.5 m and a maximum of
1.0 m. Where samples were not at 1.0 m, the sample breaks were
constrained by geological structures (e.g.
lithological/mineralisation boundaries, faults etc). The sample
sizes are considered appropriate for the nature of the
mineralisation, material grain size, and to enable representivity of
samples.
All staff were adequately trained for all sampling steps, with
geologists preparing sample sheets prior to release for cutting and
sampling.
No field duplicate samples were collected due to limited size of
the core available.
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
Samples were submitted for preparation at the ALS laboratory in
Burnie and assayed for Au by AU-AA26 (25 g charge fire assay) and
selected elements including Co, W, Sn and Mo by XRF15b (lithium
borate fusion followed by XRF) which provides a total digest
suitable for scheelite and other refractory W-bearing minerals,
thereby enabling more accurate determination of tungsten grades
in mineralised zones
Quality control procedures included use of certified reference
material (CRM’s) for assay standards and blanks. Standards and
blanks were inserted every 20 samples.
Standards and blanks passed within an acceptable level of
precision and accuracy for the relevant elements, providing
confidence in the precision and accuracy of the assay results for
most elements.
No field duplicates were collected / reported.
Page 14 of 18 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Verification
of sampling
and assaying
The verification of significant
intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
Discuss any adjustment to assay data.
Significant mineralised intersections in the reported sampling
have been verified by multiple company personnel.
Logging data is recorded on excel templates and stored on
company storage drives. Data is also uploaded to a central
database, that is also backed up offsite. Logging templates contain
restraints to minimise data entry errors, and data is further
validated by database administrators upon transferal to the
central database.
Verified assay data is received directly from the laboratory and
stored on company storage drives. Assay data is also received by
the database directly from the laboratory.
The assay data has not been adjusted except for the conversion of
W to WO3 (by using a multiplication factor of 1.264) and length
weighted averaging of individual assay results within the broader
mineralised intercepts reported. Tungsten assay results are often
reported as elemental W (tungsten), but industry standards
typically express grades as WO₃ (tungsten trioxide). To convert
between the two, a molecular weight factor is applied. Tungsten
(W) has an atomic weight of 183.84, while WO₃ has a molecular
weight of 231.84. The ratio 231.84 ÷ 183.84 = 1.264.
No twinned holes have been drilled to date.
Location of
data points
Accuracy a
Share your feedback
Discover