Bulk Sample Returns Excellent Recoveries of High-Grade Gold
Released
Released
Announcement PDF
ASX Announcement
10 June 2025
Grenadier Prospect, Golden Ridge Project
NE Tasmania
Bulk Sample Returns Excellent
Recoveries of High-Grade Gold
ASX: FG1
ABN 82 644 122 216
Highlights
•
Assays averaging 10.5g/t Au with 95% gold recoveries from
conventional leach test work on bulk sample material from the
Grenadier Prospect
•
Results consistent with 94.5% average gold recovery achieved
from 2023 testwork on the nearby Trafalgar prospect 1
•
Follow-up metallurgical testwork on a larger sample now planned
•
Drilling at Grenadier Prospect to commence in coming weeks
•
Grenadier Prospect is 100%-owned by Flynn Gold with excellent
access to infrastructure
•
For further information or to post questions, go to the Flynn Gold
Investor Hub at https://flynngold.com.au/link/weYqLe
CAPITAL STRUCTURE
Share Price: A$0.031
Cash (31/03/25): A$1.02M
Debt: Nil
Ordinary Shares: 391.3M
Market Cap: A$11.9M
Options
Listed (FG1O): 50.6M
Unlisted Options:65.9M
Performance Rights: 2.4M
BOARD OF DIRECTORS
Clive Duncan
Non-Executive Chair
Neil Marston
Managing Director and CEO
Sam Garrett
Technical Director
John Forwood
Non-Executive Director
COMPANY SECRETARY
Mathew Watkins
CONTACT
Suite 2, Level 11,
385 Bourke Street,
Melbourne,
Victoria, 3000
+61 (0) 3 9692 7222
info@flynngold.com.au
www.flynngold.com.au
Flynn Gold Limited (ASX: FG1, “Flynn” or “the Company”) is
pleased to advise outstanding results from sighter metallurgical
testwork completed on its recently discovered Grenadier Prospect
within the Company’s 100%-owned Golden Ridge Project (Figure 1),
located in Northeast Tasmania.
Managing Director and CEO, Neil Marston commented:
“These results from the recently collected bulk sample from the
Grenadier Prospect confirm the potential of this new high-grade gold
discovery at the Golden Ridge Project, delivering an excellent
average grade for the assayed samples of 10.5g/t Au.
“The program of sighter leach tests returned an average gold recovery
of 95%, which is an extremely encouraging result and consistent with
earlier testwork done on our nearby Trafalgar Prospect.
1
See FG1 ASX Announcement dated 22 November 2023 for full details
JOIN FLYNN GOLD’S INTERACTIVE INVESTOR HUB to interact with Flynn’s
announcements and updates by asking questions or making comments which our
team will respond to where possible.
Visit https://flynngold.com.au/auth/signup
“Undertaking these tests early is a vital step to determine if the high-grade gold at our
Tasmanian projects can be recovered using well established technology. These results
indicate potential for excellent gold recoveries using standard leaching processes.
“Follow-up detailed test work on a larger parcel of the Grenadier bulk sample is now
being planned.
“With all permitting now in place for drilling, Flynn’s first ever drill program at the
Grenadier Prospect is scheduled to commence in the coming weeks, testing for highgrade gold mineralisation in shallow first-pass drilling.
“The Grenadier Prospect is a new greenfields discovery not included in our Exploration
Target 2 for the Golden Ridge Project and offers substantial upside potential.”
Figure 1 – Location of Flynn Gold tenements in NE Tasmania.
2
See FG1 ASX Announcement dated 14th November 2024 for full details
Page 2 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Grenadier Prospect - Leaching Test Results
The Company recently collected a bulk sample of approximately 10 tonnes from the
G2 Vein at the Grenadier Prospect. The bulk sample comprises fresh to partially
oxidised arsenopyrite-pyrite bearing quartz vein material 3. A sighter program of
metallurgical testwork was undertaken on sub-samples of the bulk sample, with the
aim of establishing whether the gold hosted in the high-grade G2 Vein zone has
potential to be recovered using conventional cyanide leaching processes.
A total of six representative grab samples, each between 4.5kg – 6.5kg in weight, were
collected from the bulk sample and sent to Australian Laboratory Services Pty Ltd
(ALS) for crushing and duplicate splitting to make 12 samples for test work. The testing
regime for the 12 samples included:
a) pulverising to 85% passing 75 micron (85% of the particles are smaller than 75
microns);
b) head grade analysis for gold by 50g Fire Assay (FA50) and multi-elements using
a multi-element ultra trace method;
c) analysis for gold recovery by cyanide leach of 1kg samples using LeachWELLTM
reagent, and
d) analysis for gold in the LeachWELLTM test tails by 50g Fire Assay (FA50).
Table 1 below lists the gold grades from the LeachWELLTM cyanide leach and the
tailings Fire Assay, which are added together to establish the total gold grade. The
average total gold grade of the sighter samples was 10.54g/t Au. The gold head
grades received from the FA50 method are also included in Table 1 for comparison.
To calculate the percentage of cyanide (NaCN) leachable gold, the LeachWELLTM gold
grade is divided by the total gold grade. Table 1 shows gold recoveries ranged from
92.6% to 95.8%. Overall, the average gold recovery is 94.9% across the 12 samples.
Table 1: Results of LeachWELLTM and FA50 Analysis
Sample
ID
78740
78741
78742
78743
78744
78745
78746
78747
78748
78749
78750
78751
Average
3
NaCN leach
Au (ppm)
11.35
12.00
9.07
8.35
9.39
9.42
7.00
7.69
10.75
10.50
12.35
12.20
10.00
LeachWELLTM TEST
Tail (FA50)
TOTAL
Au (ppm)
Au (ppm)
0.64
0.96
0.49
0.59
0.45
0.41
0.35
0.37
0.51
0.46
0.60
0.62
0.54
11.99
12.96
9.56
8.94
9.84
9.83
7.35
8.06
11.26
10.96
12.95
12.82
10.54
NaCN
Recovery (%)
94.7%
92.6%
94.9%
93.4%
95.4%
95.8%
95.2%
95.4%
95.5%
95.8%
95.4%
95.2%
94.9%
Head Grade
FA50
Au (ppm)
11.15
12.20
9.35
8.64
9.68
9.92
6.93
7.71
10.65
11.00
12.65
12.30
10.18
See FG1 ASX Announcement dated 26 May 2025 for full details
Page 3 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Variance
Au
(ppm)
0.84
0.76
0.21
0.30
0.16
-0.09
0.42
0.35
0.61
-0.04
0.30
0.52
0.36
(%)
107.5%
106.2%
102.2%
103.5%
101.7%
99.1%
106.1%
104.5%
105.7%
99.6%
102.4%
104.2%
103.6%
The average total gold grade of 10.54g/t Au is comparable to the in-situ gold assays
of between 6.6g/t Au and 11.8g/t Au 4 from G2 vein samples collected at the same
location where the bulk sample was collected (Trench 9).
Importantly, the average gold recovery of 94.9% for the Grenadier samples is very
similar to earlier testwork undertaken on 26 drill samples from the Trafalgar Prospect
in 2023, which yielded an average gold recovery of 94.5% 5.
Based on these preliminary test work results, it appears that high-grade gold
mineralisation at Golden Ridge will be recoverable using standard cyanide leach
processes.
Grenadier Prospect – Next Steps
Diamond drilling
Drilling approvals have been received from Mineral Resources Tasmania (MRT).
Drill pad preparation has been completed, with initial drilling expected to commence
in the coming weeks.
This maiden drilling program is designed to test the down-dip continuity of high-grade
quartz-sulphide veins exposed near surface in recent trenching and investigate the
structural controls of gold mineralisation at Grenadier.
Metallurgical Testwork
The Company is currently reviewing proposals to undertake follow-up detailed
metallurgical test work on a larger scale using 100-200kg of the bulk sample, including
further leach and gravity separation test work. This testwork will provide valuable
additional information needed for future processing plant design.
Grenadier Prospect – Background
The Grenadier Prospect represents a greenfields gold discovery made by the
Company at Golden Ridge, with no recorded gold occurrences or mining activity
undertaken at the prospect during the region’s main historical mining period (late
1800’s to early 1900’s).
Exploration undertaken by Flynn at Golden Ridge has identified extensive intrusiverelated type gold mineralisation (IRGS) extending over a 9km-long zone along the
southern contact margin of the Golden Ridge Granodiorite and enclosing
metasediments.
4
5
See FG1 ASX Announcement dated 26 May 2025 for full details
See FG1 ASX Announcement dated 22 November 2023 for full details
Page 4 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
The Grenadier Prospect is located on the western margin of the Golden Ridge
Granodiorite intrusion, on the opposite side to Flynn’s most advanced prospect, the
Trafalgar Prospect (Figure 2).
Figure 2 – Golden Ridge Project – Geology and Prospect Locations
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Nicholas Read
Media & Investor Relations
+61 (0) 419 929 046
nicholas@readcorporate.com.au
Page 5 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
About Flynn Gold Limited
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania and
Western Australia (see Figure 3). The Company has ten 100% owned tenements located in northeast
Tasmania which are highly prospective for gold as well as tin/tungsten.
The Company also has the Henty zinc-lead-silver project on Tasmania’s mineral-rich west coast and
the Firetower gold and battery metals project located in northern Tasmania. Flynn has also established
a portfolio of exploration assets in the Pilbara and Yilgarn regions of Western Australia.
For further information regarding Flynn Gold please visit the ASX platform (ASX: FG1) or the Company’s
website www.flynngold.com.au.
Figure 3 - Location Plan of Flynn Gold Projects
Page 6 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results is based on information
compiled by Mr Michael Fenwick, a Competent Person who is a Member of the Australian Institute of
Geoscientists. Mr Fenwick is a full-time employee of Flynn Gold. Mr Fenwick has sufficient experience
that is relevant to the style of mineralisation and type of deposit under consideration and to the activity
being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian
Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Fenwick consents
to the inclusion in the report of the matters based on his information in the form and context in which it
appears.
This announcement includes information that relates to Exploration Results prepared and first disclosed
under the JORC Code (2012) and extracted from the Company’s previous ASX announcements as
noted, and the Company’s Prospectus dated 30 March 2021. Copies of these announcements are
available from the ASX Announcements page of the Company’s website: www.flynnngold.com.au.
The Company confirms that it is not aware of any new information or data that materially affects the
information included within the Prospectus dated 30 March 2021.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
References
ASX Announcement 15 June 2021 – Prospectus
ASX Announcement 22 November 2023 – 94.5% Gold Recovery from Metallurgical Tests on Trafalgar
Prospect, NE Tasmania
ASX Announcement 16 October 2024 – New Gold Vein System Discovery at Grenadier Prospect
ASX Announcement 14 November 2024 – Exploration Target for Golden Ridge, NE Tasmania
ASX Announcement 13 January 2025 – Flynn Expands Key Gold Targets at Golden Ridge
ASX Announcement 6 May 2025 – New Priority Targets Emerging at Golden Ridge Project, NE
Tasmania
ASX Announcement 26 May 2025 – High-Grade Gold Vein System Bulk Sample - Grenadier Prospect
Page 7 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results – Golden Ridge Project
Section 1: Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g.
cut channels, random chips, or
specific specialised industry standard
measurement tools appropriate to
the minerals under investigation,
such as downhole gamma sondes, or
handheld XRF instruments, etc.).
These examples should not be taken
as limiting the broad meaning of
sampling.
The sampling described in this report refers to bulk sampling and
sub-sampling of the bulk sample.
Include reference to measures taken
to ensure sample representivity and
the appropriate calibration of any
measurement tools or systems used.
Bulk Sample
Aspects of the determination of
mineralisation that are Material to
the Public Report.
Samples were collected by qualified geologists or under geological
supervision. The nature and quality of sampling is carried out under
QAQC procedures as per industry standards.
A 10-tonne bulk sample was excavated from the floor of the Trench 9
cuddy at the Grenadier prospect, targeting a quartz-sulphide vein
exposed during trenching. The sample was collected using a 5-tonne
tracked excavator. Vein material was manually broken down and
separated from host rock on site. Care was taken to ensure complete
extraction of the vein, including manual collection of smaller
fragments to supplement the excavator bucket. The bulk sample was
collected for preliminary metallurgical test work and is not intended
for resource estimation purposes.
Sub Sampling (Rock-chip)
Six rock-chip sub-samples, ranging from 4.5 kg to 6.5 kg, were
collected from the bulk sample. Samples were taken from large
intact boulders where both hanging wall and footwall contacts were
visible. Samples were taken perpendicular to the contacts to ensure
the full width of the vein was represented.
Certified reference materials (CRMs) and a blank were inserted into
the analytical batch to monitor the accuracy and precision of fire
assay results.
Samples were prepared and analysed at ALS Perth using the
following procedures:
•
WEI-21: Sample weighing
•
CRU-36f: Fine crushing
•
SPL-22Y: Splitting
•
PUL-23: Pulverisation to 85% passing 75 µm
Analytical methods included:
•
Head grade determination by 50 g fire assay for gold (AuAA26)
•
Multi-element analysis by four-acid digestion and ICP-MS
(ME-MS61)
•
Gold recovery testing using a 1 kg, 24-hour bottle roll
cyanide leach with LeachWELLTM accelerant (ME-CN15)
•
Fire assay (Au-AA26) of the leach residue (tails)
Page 8 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Drilling
techniques
Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc.) and details (e.g. core
diameter, triple or standard tube,
depth of diamond tails, facesampling bit or other type, whether
core is oriented and if so, by what
method, etc.).
No new drilling data is contained in this report.
Drill sample
recovery
Method of recording and assessing
core and chip sample recoveries and
results assessed.
No new drilling data is contained in this report.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
No new drilling data is contained in this report.
Whether a relationship exists
between sample recovery and grade
and whether sample bias may have
occurred due to preferential
loss/gain of fine/coarse material.
No new drilling data is contained in this report.
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
The trench from which the bulk sample was collected has been
geologically and geotechnically logged to a standard appropriate for
future Mineral Resource estimation, mining studies, and
metallurgical assessment. Logging was conducted using a
standardised company template, with data transferred to the
company database upon completion.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
Where quantitative logging (e.g. using percentages or numerical
scales) is not applicable, standardised descriptors are used to record
texture, lithology, alteration, and mineralisation. Geologists may
supplement these descriptors with qualitative observations to
provide additional detail.
Logging
The total length and percentage of
the relevant intersections logged.
Subsampling
techniques
and sample
preparation
Photographs were taken along the trench prior to bulk sample
extraction to document the exposed vein. The trench excavation
from which the bulk sample was taken has been fully logged.
If core, whether cut or sawn and
whether quarter, half or all core
taken.
No new drilling data is contained in this report.
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
Six sub-samples, each between 4.5 kg and 6.5 kg, were collected
from large boulders within the bulk sample. Sub-samples were taken
using a geological pick or sledgehammer from boulders where both
hanging wall and footwall contacts were intact. Sampling was
conducted perpendicular to the vein contacts to ensure
representative coverage across the full vein width.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted
for all subsampling stages to
maximise representivity of samples.
Measures taken to ensure that the
sampling is representative of the insitu material collected, including for
instance results for field
duplicate/second-half sampling.
Samples were submitted to ALS Perth, where they were crushed
according to industry-standard protocols. Each crushed sample was
then dry riffle split into two sub-samples, resulting in a total of
twelve samples for analysis.
All sample preparation and sub-sampling procedures followed
industry best practice and were designed to maintain the integrity
and representativeness of the vein material.
Whether sample sizes are
appropriate to the grain size of the
material being sampled.
Page 9 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Quality of
assay data
and
laboratory
tests
The nature, quality and
appropriateness of the assaying and
laboratory procedures used and
whether the technique is considered
partial or total.
Sample preparation and analytical work were conducted at ALS
Perth. Fire assay methods for gold, multi-element analysis, and
cyanide leach test work are internationally recognised and
appropriate for the style of mineralisation at Grenadier. The cyanide
leach method was specifically selected for preliminary metallurgical
recovery test work. All techniques are considered total for the
mineralisation style.
For geophysical tools,
spectrometers, handheld XRF
instruments, etc, the parameters
used in determining the analysis
including instrument make and
model, reading times, calibrations
factors applied and their derivation,
etc.
No geophysical tools, spectrometers, handheld XRF instruments etc.
were used to determine any element concentrations.
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory
checks) and whether acceptable
levels of accuracy (i.e. lack of bias)
and precision have been established.
Flynn Gold inserted one Certified Reference Material (CRM) standard
and one blank into the submission batch. OREAS CRMs were selected
based on expected grade ranges, including anomalous (<1 g/t Au),
low (<4 g/t Au), mid-range (4–10 g/t Au), high (>10 g/t Au), and very
high grade (>40 g/t Au), guided by visual mineralogy and vein
textures. Both the standard and blank returned results within
acceptable accuracy and precision limits.
ALS Perth conducted routine internal QAQC procedures, including
laboratory standards, blanks, duplicates, and splits. Lab duplicates
were also requested by Flynn Gold and taken post-crushing. Internal
QAQC results supplied by ALS Perth are reviewed on an ongoing
basis and are considered to fall within acceptable performance
thresholds.
No external laboratory checks have been conducted to date.
However, sample pulps and splits have been retained for future
verification.
Verification
of sampling
and assaying
The verification of significant
intersections by either independent
or alternative company personnel.
All reported data was subjected to validation and verification by
company personnel prior to reporting.
The use of twinned holes.
This report contains rock-chip data only.
Documentation of primary data,
data entry procedures, data
verification, data storage (physical
and electronic) protocols.
Primary geological data is collected both digitally and manually
(paper logging forms) with in-house logging codes. Data is entered
into Excel-based templates with validation constraints to minimise
entry errors, then uploaded to company storage and transferred to a
central database, which is routinely backed up offsite. Additional
validation is conducted by database administrators during data
integration.
Flynn Gold has undertaken sufficient internal validation to provide
the Competent Person with confidence that sampling and data
management were performed to industry standards, and that the
data is suitable for exploration planning and target generation.
All original sampling records are securely retained by the company.
Location of
data points
Discuss any adjustment to assay
data.
Assay results are received directly from ALS Perth and are stored on
company servers and within the central database. No adjustments
have been made to any assay data.
Accuracy and quality of surveys used
to locate drillholes (collar and
downhole surveys), trenches, mine
workings and other locations used in
Mineral Resource estimation.
The bulk sample was collected from a quartz-sulphide vein exposed
in a recently excavated trench at the Grenadier prospect. Trenches
were surveyed using a Leica GS18i GNSS rover receiving RTK
corrections from a Leica GS15 base station (GR1). The GR1 recorded
static GPS observations, which were post-processed using Leica
Page 10 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
SmartNet software referencing five nearby base stations (St Helens,
Bicheno, Derby, Lilydale, and Campbell Town).
Leica Infinity software was used to process survey data and compute
coordinates in the MGA94 Zone 55 grid system. Survey accuracy is
estimated to be within ±0.1 m.
Data spacing
and
distribution
Orientation
of data in
relation to
geological
structure
Sample
security
Specification of the grid system used.
All Flynn Gold sample locations are recorded in MGA94 Zone 55.
Historic maps have been geo-referenced to the same coordinate
system using verified field landmarks (e.g., historic workings, roads,
and creeks), which have been matched to LiDAR imagery and GPS
measurements.
Quality and adequacy of
topographic control.
Relative levels (RLs) have been assigned using high-resolution LiDAR
data.
Data spacing for reporting of
Exploration Results.
The bulk sample was collected from a single exposed quartz-sulphide
vein at the Grenadier prospect. The data spacing is appropriate for
preliminary metallurgical test work but is not sufficient to support a
Mineral Resource estimate at this stage.
Whether the data spacing and
distribution is sufficient to establish
the degree of geological and grade
continuity appropriate for the
Mineral Resource and Ore Reserve
estimation procedure(s) and
classifications applied.
The results from this work will contribute to future Mineral Resource
Estimations as the project advances and sufficient geological and
analytical data becomes available.
Whether sample compositing has
been applied.
No sample compositing has been applied.
Whether the orientation of sampling
achieves unbiased sampling of
possible structures and the extent to
which this is known, considering the
deposit type.
Sub-samples of the bulk sample were collected perpendicular to the
vein contacts to ensure representative sampling across the full width
of the mineralised vein for metallurgical test work.
The exposed quartz-sulphide vein is steeply dipping and was
sampled from a sub-horizontal trench floor, allowing for a nearperpendicular intersection of the structure. As such, the sampling
orientation is considered appropriate and is not expected to
introduce any significant bias.
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and reported if
material.
No sampling bias is evident from the data collected to date.
The measures taken to ensure
sample security.
Bulk Sample was delivered to Flynn Gold’s Scottsdale headquarters
by contractor. Representative samples collected by company staff.
Samples are loaded and secured onto a Company vehicle for
transportation to the laboratory.
Submissions to ALS Burnie
Samples are delivered to the Burnie lab by company staff.
Verification of sample numbers is conducted by the laboratory on
receipt of samples, and a sample receipt is issued to Flynn Gold.
Details of all sample movements are digitally recorded and available
in real time to authorised staff through the ALS Webtrieve Portal.
Audits or
reviews
The results of any audits or reviews
of sampling techniques and data.
Continuous monitoring of CRM results, blanks and duplicates is
undertaken by Flynn geologists. Flynn Geologists are continually
assessing the suitability of sampling methods and assaying
techniques.
Use of independent contractors EarthSQL to administer the
geological database ensures it remains up to date and assists in
keeping the data free of errors.
Page 11 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne, Victoria, 3000
info@flynngold.com.au | www.flynngold.com.au
Section 2: Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure status
Type, reference name/number,
location and ownership including
agreements or material issues with
third parties such as joint ventures,
partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
The Golden Ridge Project covers a total area of 167km2 under a
single exploration licence, EL17/2018,
The security of the tenure held at
the time of reporting along with
any known impediments to
obtaining a licence to operate in the
area.
Flynn Gold is unaware of any impediments for exploration on the
granted licence and does not anticipate any impediments to
exploration for the area under application.
Acknowledgment and appraisal of
exploration by other parties.
Relevant exploration done by other parties are outlined in
References listed in this release.
Exploration
done by
other parties
The licence is owned and controlled by Flynn Gold through its 100%
owned subsidiary, Kingfisher Exploration Pty Ltd.
All historical exploration records are publicly available via the
Tasmanian Government websites including Land Information System
Tasmania (thelist.tas.gov.au).
Previous exploration has been completed on Flynn Gold’s projects by
a variety of companies. Please refer to the FG1 Prospectus dated
30th March 2021 for details and references relating to previous work.
All work conducted by previous operators at the Golden Ridge
project is considered to be of a reasonably high quality, and done to
industry standards of the day, with information incorporated into
annual statutory reports.
Previous operators have conducted very little exploration work
outside of the historical small scale mine working areas at the
Golden Ridge projects.
Geology
Deposit type, geological setting and
style of mineralisation.
Vein-hosted gold mineralisation at Golden Ridge is interpreted to be
of the IRGS type, comprisi
Share your feedback
Discover