Up to 67g/t Au Intersected in Drilling at Trafalgar, NE Tas
Released
Released
Announcement PDF
ASX Announcement
28 May 2024
Up to 67g/t Au Intersected in
Drilling at Trafalgar, NE Tasmania
Highlights
•
Assays received from the first hole in the diamond drilling program
underway at the Trafalgar Prospect, Golden Ridge, including 3
intersections returning >1 ounce/tonne gold
•
Multiple high-grade gold veins intersected in drill hole TFDD016,
including:
ASX: FG1
ABN 82 644 122 216
CAPITAL STRUCTURE
•
0.4m @ 67.6g/t Au within 1.3m @ 21.9g/t Au from 248.7m;
Cash (31/03/24): A$1.53M
•
0.3m @ 39.2g/t Au from 243.2m;
Debt: Nil
•
0.5m @ 35.1g/t Au within 1.4m @ 12.7g/t Au from 164.6m
(Trafalgar Main Vein);
•
0.3m @ 19.0g/t Au within 0.65m @ 10.5g/t Au from 187.55m
(Magazine Vein);
•
0.3m @ 12.3g/t Au within 1.2m @ 3.5g/t Au from 233.0m;
•
0.4m @ 10.8g/t Au from 135.2m.
Share Price: A$0.0.33
Ordinary Shares:254.5M
Market Cap: A$8,4M
Options
Listed (FG1O): 50.6M
Unlisted:
3.4M
Performance Rights: 2.7M
BOARD OF DIRECTORS
Clive Duncan
Non-Executive Chair
•
Drilling confirms continuity of multiple sub-parallel high-grade
gold veins at Trafalgar
•
Drilling is ongoing with TFDD017 recently completed and TFDD018
underway – further assays pending for TFDD016 and later holes
•
Previously reported drilling results from Trafalgar included multiple
intersections grading >100g/t Au, including:
Neil Marston
Managing Director and CEO
Sam Garrett
Technical Director
John Forwood
Non-Executive Director
o TFD001:
5.0m @ 12.56g/t Au, incl. 0.4m @ 150.0g/t Au from 202.0m
COMPANY SECRETARY
Mathew Watkins
o TFDD003:
1.2m @ 65.9g/t Au, incl. 0.5m @ 143.0g/t Au from 57.5m
CONTACT
o TFDD005:
12.3m @ 16.8g/t Au, incl. 0.7m @ 152.5g/t Au from 120.3m
Level 4, 96-100 Albert Road,
South Melbourne,
Victoria, 3205
o TFDD013:
4.0m @ 23.7g/t Au, incl. 0.5m @ 169.8g/t Au from 25.9m
+61 (0) 3 9692 7222
info@flynngold.com.au
o TFDD015:
1.1m @ 51.3g/t Au, incl. 0.4m @ 137.8g/t Au from 353.9m
www.flynngold.com.au
•
For further information or to post questions go to the Flynn Gold
Investor Hub at https://investorhub.flynngold.com.au/link/oPBYlr
Flynn Gold Limited (ASX: FG1, “Flynn” or “the Company”) is pleased to provide the first
results from its latest diamond drilling activities at the Company’s 100% owned Golden Ridge
Project located in Northeast Tasmania (Figure 1).
Managing Director and CEO, Neil Marston commented,
“These are impressive early results from the first hole of our drilling campaign at the Trafalgar
Prospect at Golden Ridge in Northeast Tasmania, adding further confidence to our
understanding of Trafalgar as a multiple high-grade vein, intrusion-related gold deposit.
“Earlier this year our exploration model for Trafalgar was refined and updated. Based on the
new model this first drill hole was designed to test for mineralisation beneath the historic
Trafalgar mine, and up dip of previously intersected high-grade intervals. We have intersected
high-grade mineralisation in the target zones, which increases confidence in our work and the
ability to understand this high-grade gold system.”
“We look forward to releasing further drilling results as this program progresses over the
coming weeks.”
Figure 1 - Location of Flynn Gold tenements in NE Tasmania.
Page 2 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Trafalgar Prospect - Phase 3 Drilling
Phase 3 drilling commenced at the Trafalgar prospect in mid-April 2024. The planned 1,500m
diamond drill program will initially comprise infill and extension drilling targeting down-dip and
along-strike extensions to previously drilled high-grade gold intercepts. Initial holes are
designed as infill and close-spaced step-outs around the previous wide-spaced drilling (100m
average drill hole spacing) and will be used to test and refine the current vein model and inform
targeting of further step-out strike and depth extension drilling.
The first hole, TFDD016, was drilled to 355.9m and was designed to in-fill widely-spaced
drilling and test all 3 of the main veins (Trafalgar Main, Magazine, and Trafalgar South veins)
and associated splays identified in Flynn’s recent modelled interpretation of the deposit
Assay results have been received for TFDD016 from 18.0m to 274.0m depth with the
remaining samples (274.0-355.9m) at the laboratory.
TFDD016 was drilled into granodiorite, drilling towards the south under historical workings. As
predicted, multiple zones with visible signs of mineralisation, including visible gold, were
intersected in the hole. Significant intercepts are shown in Figure 2 and Figure 3 with full drilling
details shown in Tables 1 & 2.
Figure 2 - Trafalgar Prospect collar location plan with interpreted mineralised veins projected to [surface].
The second hole, TFDD017, was completed last week with a final depth of 248.4m. It was also
designed to test all the main veins (Trafalgar Main, Magazine, and Trafalgar South veins) (see
Figure 2). This hole is currently being logged and sampled.
Page 3 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
The third drill hole, TFDD018, will commence this week with a target depth of 330m and is also
designed to test all 3 of the main veins (see Figure 2). Assay results will be announced when
they become available.
Figure 3 - Trafalgar Prospect Vein Model Cross Section showing completed drillhole TFDD016.
Page 4 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Table 1. Trafalgar Prospect Phase 3 Collar Information
Drillhole ID
TFDD016
TFDD017
TFDD018
Notes:
•
Easting
GDA94
588260
588428
588324
Northing
GDA94
5416640
5416651
5416389
RL (m)
159
162
263
Azimuth
(True)
185
162
315
Dip (deg)
EOH Depth (m)
-47
-50
-53
355.9
248.4
330 (planned)
Co-ordinate projection is MGA94, zone 55.
Table 2. Drill TFDD016 Significant intercepts (≥0.3g/t Au)
Drillhole ID
From (m)
To (m)
Interval (m)
Au (g/t)
Comment
TFDD016
57.5
60.0
135.2
151.75
164.6
164.6
176.0
182.2
182.2
187.55
187.55
194.4
233.0
233.9
243.2
248.7
249.2
274.0
57.8
61.0
135.6
152.2
166.0
165.1
178.0
183.8
182.6
188.2
187.85
195.0
234.2
234.2
243.5
250.0
249.6
355.9
0.3
1.0
0.4
0.45
1.4
0.5
2.0
1.6
0.4
0.65
0.3
0.6
1.2
0.3
0.3
1.3
0.4
3.2
0.5
10.8
0.4
12.7
35.1
0.8
1.5
5.6
10.5
19.0
0.4
3.5
12.3
39.2
21.9
67.6
Coarse AsPy, CPy and Py vein
incl.
incl.
incl.
incl.
Qtz-AsPy, Gn vein with VG
Trafalgar Main Vein
Semi massive sulphide vein
Magazine Vein
Qtz-AsPy vein with VG
Qtz-AsPy vein with VG
Qtz-AsPy vein with VG
Qtz-AsPy vein with VG
Assays Pending
Notes:
•
•
•
•
•
•
•
Significant Intercepts cut-off grade is 0.3g/t gold unless indicated otherwise.
All reported intersections are assayed on geological intervals ranging from 0.3 to 2m.
Reported grades are calculated as length-weighted averages.
Intercepts are downhole lengths and may not be true widths of the veins/intersections.
NSI means No Significant Intercept.
Drill core samples are analysed for gold by photon analysis.
Abbreviations:
AsPy - Arsenopyrite
CPy - Chalcopyrite (copper mineral)
Py - Pyrite
Gn - Galena (lead mineral)
Qtz - Quartz
VG - Visible Gold
Page 5 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Golden Ridge - Project Background
The Company’s flagship Golden Ridge Project is situated within EL17/2018 in Northeast
Tasmania (see Figure 1).
Exploration by the Company at Golden Ridge has identified anomalous gold extending over a
9km long contact zone along the southern margin of the Golden Ridge Granodiorite (See
Figure 4). The Golden Ridge Project exhibits attributes of a large intrusive-related gold system
(IRGS) and the Company is continuing to identify and test multiple exploration targets, with the
aim of making further discoveries.
Figure 4 - Flynn Gold’s Golden Ridge Project, NE Tasmania, showing prospect areas.
Page 6 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Ben Creagh
Media & Investor Relations
+61 (0) 417 464 233
benc@nwrcommunications.com.au
About Flynn Gold Limited
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania and
Western Australia (see Figure 5). The Company has nine 100% owned tenements located in northeast
Tasmania which are highly prospective for gold as well as tin/tungsten. The Company also has the
Henty zinc-lead-silver project on Tasmania’s mineral-rich west coast and the Firetower gold and battery
metals project located in northern Tasmania.
Flynn has also established a portfolio of gold-lithium exploration assets in the Pilbara and Yilgarn regions
of Western Australia.
For further information regarding Flynn Gold please visit the ASX platform (ASX: FG1) or the Company’s
website www.flynngold.com.au.
Figure 5 - Location Plan of Flynn Gold Projects
Page 7 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results is based on information
compiled by Mr Sean Westbrook, a Competent Person who is a Member of the Australian Institute of
Geoscientists. Mr Westbrook is a consultant to Flynn Gold and is a shareholder in Flynn Gold. Mr
Westbrook has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined
in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’. Mr Westbrook consents to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
This announcement includes information that relates to Exploration Results prepared and first disclosed
under the JORC Code (2012) and extracted from the Company’s previous ASX announcements as
noted, and the Company’s Prospectus dated 30 March 2021. Copies of these announcements are
available from the ASX Announcements page of the Company’s website: www.flynnngold.com.au.
The Company confirms that it is not aware of any new information or data that materially affects the
information included within the Prospectus dated 30 March 2021.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
References
ASX Announcement 15 June 2021 – Prospectus dated 30 March 2021
ASX Announcement 25 May 2022 – Commencement of Trafalgar drilling
ASX Announcement 5 July 2022 – TFDD002 results
ASX Announcement 21 September 2022 – TFDD002 results
ASX Announcement 24 October 2022 – TFDD003 results
ASX Announcement 12 December 2022 – TFDD002B, TFDD003, TFDD004 and TFDD005 results
ASX Announcement 19 January 2023 – Exploration update
ASX Announcement 21 March 2023 – Exploration update, Phase 2 drilling commenced
ASX Announcement 12 April 2023 – TRDD004, TFDD005B, TFDD006 and TFDD008 results
ASX Announcement 18 July 2023 – TFDD006, TFDD007, TFDD009, TFDD011 results
ASX Announcement 14 September 2023 – TFDD009, TFDD010, TFDD011, TFDD012, and TFDD013 results
ASX Announcement 10 October 2023 – TFDD011, TFDD012, and TFDD015 results
ASX Announcement 22 November 2023 – TFDD014, TFDD015, and initial metallurgical test work results
ASX Announcement 18 April 2024 – Drilling Underway at Trafalgar High-Grade Gold Prospect
Page 8 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results – Golden Ridge Project
Section 1: Sampling Techniques and Data
Criteria
JORC Code explanation
Commentary
Sampling
techniques
Nature and quality of sampling (e.g.
cut channels, random chips, or
specific specialised industry standard
measurement tools appropriate to
the minerals under investigation,
such as downhole gamma sondes, or
handheld XRF instruments, etc.).
These examples should not be taken
as limiting the broad meaning of
sampling.
The sampling described in this report refers to diamond (DD)
drilling.
Include reference to measures taken
to ensure sample representivity and
the appropriate calibration of any
measurement tools or systems used.
Sampling is guided by Flynn’s protocols and Quality Control
procedures, as per industry standards.
Samples were all collected by qualified geologists or under
geological supervision.
The samples are judged to be representative of the rock being
drilled.
The nature and quality of sampling is carried out under QAQC
procedures as per industry standards.
Diamond core is sampled to geological boundaries with sample
lengths generally between 0.3m and 2.0m.
The core is cut on site and half core sampled. The remaining half
core is stored on site.
Care is taken when sampling the diamond core to sample the same
half side of the core as standard practice.
During sampling of the diamond drill core, certified reference
material (CRM) standards are inserted at least every 20 samples.
Blank samples are also inserted at least every 20 samples. Duplicate
samples are routinely submitted and checked against originals.
Aspects of the determination of
mineralisation that are Material to
the Public Report.
Drill core samples are sent to On Site Laboratory Services in
Bendigo. Samples are weighed, dried and crushed to -2mm, and
rotary split into a Chrysos jar (500g nominal). The residual sample
is retained.
Samples are assayed for gold via photo assay method PAAU2.
Photon assay is a non-destructive assay method.
PAAU2 has a detection range of 0.01 to 350 ppm Au.
Coarse gold was observed in some drill core intervals. Additional
sampling using various techniques and duplicate samples is ongoing
to allow an assessment of any sampling issues. Current results
appear to be consistent with historical drilling assay results
associated with coarse visible gold.
Drilling
techniques
Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic,
etc.) and details (e.g. core diameter,
triple or standard tube, depth of
diamond tails, face-sampling bit or
other type, whether core is oriented
and if so, by what method, etc.).
Drilling is undertaken by diamond core technique at triple tube PQ3
(83.1mm diameter),HQ3 (61.1mm diameter), and NQ3 (42mm)
core sizes.
Industry standard diamond drilling techniques are used.
HQ core is orientated using a Boart Longyear Truecore UPIX core
orientation system or similar.
Hole traces are surveyed using a digital down-hole survey camera
tool.
The location of each hole was recorded by handheld GPS with
positional accuracy of approximately +/-5m. Location data was
collected in MGA94 zone 55.
Drill holes are planned to intersect mineralisation at an optimum
angle.
Page 9 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Drill sample
recovery
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Core recovery was logged and recorded in the company’s database.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Triple tube diamond core drilling techniques are used.
The core recovery is logged for each run of drilling and measured
against the drilled length.
Generally, sample weights are comparable, and any bias is
considered negligible.
Logging
Whether a relationship exists
between sample recovery and grade
and whether sample bias may have
occurred due to preferential
loss/gain of fine/coarse material.
No relationship has been noticed between sample recovery and
grade.
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
All diamond core holes are geologically logged in full for core
recovery, RQD, geotechnical parameters, weathering, oxidation,
lithology, grainsize, alteration, mineralisation, vein types and vein
intensity, structure, and magnetic susceptibility.
The geological logging was done using a standardised logging
system. This information and the sampling details were transferred
into Flynn Gold’s drilling database.
The geological and geotechnical logging is considered to be
completed to a sufficient level to support appropriate future
geological, Mineral Resource estimation, mining, and metallurgical
studies.
Subsampling
techniques
and sample
preparation
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc) photography.
Logging is both qualitative and quantitative in nature.
The total length and percentage of
the relevant intersections logged.
All drill holes are logged in full and to the total length of each hole.
If core, whether cut or sawn and
whether quarter, half or all core
taken.
The core is cut on site and half core sampled. The remaining half
core is stored on site.
Drill core is photographed as wet and dry, and before (full core) and
after cutting (half core).
Care is taken when sampling the diamond core to sample the same
half side of the core as standard practice.
Large diameter core drilling (PQ, HQ) is utilised to maximise
recovery and obtain larger samples to maximise representivity of
samples.
If non-core, whether riffled, tube
sampled, rotary split, etc and
whether sampled wet or dry.
N/A for DD drilling
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
Samples were transported by road and air freight to OSLS
laboratory in Bendigo.
The sample preparation for all samples follows industry best
practice.
At the laboratory all samples are weighed, dried, crushed and
pulverised (to -2mm) prior to sub-sampling (500g nominal) for
photon assay.
Standardised equipment used with QC performed at the
pulverisation stage at the labs.
Quality control procedures adopted
for all subsampling stages to
maximise representivity of samples.
Flynn Gold has protocols that cover the sample preparation at the
laboratories and the collection and assessment of data to ensure
that accurate steps are used in producing representative samples.
The crusher and pulveriser are flushed with barren material at the
start of every batch.
Page 10 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Measures taken to ensure that the
sampling is representative of the insitu material collected, including for
instance results for field
duplicate/second-half sampling.
Sampling is carried out in accordance with Flynn Gold’s protocols as
per industry best practice.
Field QC procedures involve the use of certified reference material
as assay standards and blanks, as well as coarse crush duplicates.
For analysis of diamond core, CRM standards and blanks are
inserted by the field Geologist at intervals accounting for 7 to 10%
of total samples which is considered to be to industry standards.
CRM results over low-, moderate-, and high-grade gold ranges
indicate acceptable levels of accuracy and precision of assay batch
results.
Quality of
assay data
and
laboratory
tests
Whether sample sizes are
appropriate to the grain size of the
material being sampled.
Sample sizes are considered appropriate for the style of
mineralisation sought.
The nature, quality and
appropriateness of the assaying and
laboratory procedures used and
whether the technique is considered
partial or total.
All drill core samples are sent to OSLS (Bendigo) for sample
preparation and sub-sampling prior to photon assay.
Drill core samples are sent to On Site Laboratory Services in
Bendigo. Samples are weighed, dried and crushed to -2mm, and
rotary split into a Chrysos jar (500g nominal). The residual sample
is retained.
Samples are assayed for gold via photo assay method PAAU2.
Photon assay is a non-destructive assay method.
PAAU2 has a detection range of 0.01 to 350 ppm Au.
Flynn Gold has its own internal QAQC procedure involving the use
of certified reference material (CRM) standards, blank (nonmineralised) materials, and duplicate samples.
OSLS laboratories are accredited to ISO/IEC standards.
External laboratory checks have not been used to date.
Verification
of sampling
and assaying
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make
and model, reading times,
calibrations factors applied and their
derivation, etc.
No geophysical tools were used to determine any element
concentrations
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory
checks) and whether acceptable
levels of accuracy (i.e. lack of bias)
and precision have been established.
Sample preparation checks for fineness were carried out by the
laboratory as part of their internal procedures to ensure the grind
if -2mm .
The verification of significant
intersections by either independent
or alternative company personnel.
All reported data was subjected to validation and verification by
company personnel prior to reporting.
The use of twinned holes.
Flynn Gold is yet to twin any of the historical drill holes.
Documentation of primary data,
data entry procedures, data
verification, data storage (physical
and electronic) protocols.
Primary data is collected both manually onto paper logging forms
and digitally using a field laptop computer using in-house logging
codes.
Internal laboratory QAQC checks are reported by the laboratory.
Review of the internal laboratory QAQC suggests the laboratory is
performing within acceptable limits.
The data is checked and verified prior to entering into a master
database.
Flynn Gold has done sufficient verification of the data, in the
Competent Person’s opinion to provide sufficient confidence that
sampling was performed to adequate industry standards and is fit
for the purpose of planning exploration programs and generating
targets for investigation.
Page 11 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
Location of
data points
Data spacing
and
distribution
JORC Code explanation
Commentary
Discuss any adjustment to assay
data.
All original drilling and logging records are kept on file.
Accuracy and quality of surveys used
to locate drillholes (collar and
downhole surveys), trenches, mine
workings and other locations used in
Mineral Resource estimation.
Drill hole collars are pegged before drilling and surveyed using a
handheld GPS to a lateral accuracy of +/-5m.
No adjustments have been made to any of the assay data.
Final collar locations are surveyed again upon completion of
drilling.
A Mineral Resource estimate has not been determined.
Specification of the grid system used.
All Flynn Gold samples are surveyed in the MGA 94 Zone 55 grid
system.
Quality and adequacy of topographic
control.
RL’s have been assigned from high-precision LIDAR data.
Data spacing for reporting of
Exploration Results.
Drilling holes are currently planned on section lines generally
spaced at 50 to 200m apart. Average drill hole spacing is currently
approximately 100m.
Further surveying using high-accuracy DGPS is planned.
Current drill hole locations are planned based on specific
exploration targets, with consideration also given to accessibility
and other constraints.
Orientation
of data in
relation to
geological
structure
Whether the data spacing and
distribution is sufficient to establish
the degree of geological and grade
continuity appropriate for the
Mineral Resource and Ore Reserve
estimation procedure(s) and
classifications applied.
A Mineral Resource or Ore Reserve has not been determined.
Whether sample compositing has
been applied.
There was no sample compositing.
Whether the orientation of sampling
achieves unbiased sampling of
possible structures and the extent to
which this is known, considering the
deposit type.
The orientation of controlling structures has not been fully
determined and a variety of drill orientations are being used to
investigate controlling structures.
As best as practicable, drill holes were designed to intercept
interpreted or known targets and structures at a high angle.
Flynn Gold recognises the importance of understanding the
structural controls on mineralisation and has prioritised the
collection of oriented drill core early in in its exploration drilling.
Drill holes have been designed to intersect the main lithology and
known vein orientations at appropriate orientation to maximise
structural, geotechnical and geological data.
Sample
security
If the relationship between the
drilling orientation and the
orientation of key mineralised
structures is considered to have
introduced a sampling bias, this
should be assessed and reported if
material.
From the information available, no sampling bias issues have been
identified to date.
The measures taken to ensure
sample security.
The chain of custody for all Flynn Gold samples from collection to
dispatch to assay laboratory is managed by Flynn Gold personnel.
The level of security is considered appropriate for exploration
surface sampling programs.
Sampling was undertaken and samples were transported directly
by Flynn Gold company employees or contractors to Launceston
and via a commercial transport company from Launceston to the
OSLS laboratory in Bendigo, Victoria. No third parties have been
allowed to access the samples.
Page 12 of 15 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Criteria
JORC Code explanation
Commentary
Audits or
reviews
The results of any audits or reviews
of sampling techniques and data.
No audits or reviews have been carried out at this time.
Due to the early stage of exploration, project-specific standard and
technical procedures are still being adjusted.
Section 2: Reporting of Exploration Results
Criteria
JORC Code explanation
Commentary
Mineral
tenement
and land
tenure
status
Type, reference name/number,
location and ownership including
agreements or material issues with
third parties such as joint ventures,
partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
The Golden Ridge Project covers a total area of 167km2 under a
single exploration licence, EL17/2018,
The security of the tenure held at the
time of reporting along with any
known impediments to obtaining a
licence to operate in the area.
Flynn Gold is unaware of any impediments for exploration on the
granted licence and does not anticipate any impediments to
exploration for the area under application.
Acknowledgment and appraisal of
exploration by other parties.
Relevant exploration done by other parties are outlined in
References listed in various previous ASX announcements.
Exploration
done by
other parties
The licence is owned and controlled by Flynn Gold through its 100%
owned subsidiary, Kingfisher Exploration Pty Ltd.
All historical exploration records are publicly available via the
Tasmanian Government websites including Land Information
System Tasmania (thelist.tas.gov.au).
Previous exploration has been completed on Flynn Gold’s projects
by a variety of companies. Please refer to the FG1 Prospectus dated
30th March 2021 for details and references relating to previous
work.
Significant exploration and drilling at Trafalgar has been completed
by a variety of companies, including Billiton Australia, Tamar Gold
and MPI Pty Ltd with technical studies completed by Shaw
Excavations. Please refer to the FG1 Prospectus dated 30th March
2021 for details and references therein relating to previous work.
All historical exploration records are publicly available via
Share your feedback
Discover