Extensive Shallow Gold Zones in Brilliant Prospect Drilling
Released
Released
Announcement PDF
JOIN FLYNN GOLD’S INTERACTIVE INVESTOR HUB to interact
with Flynn’s announcements and updates by asking questions or
making comments which our team will respond to where possible
ASX Announcement
10 November 2026
ASX: FG1
ABN 82 644 122 216
CAPITAL STRUCTURE
Share Price: A$0.014
Cash (30/09/26): A$0.41M
Debt: Nil
Ordinary Shares: 708.6M
Market Cap: A$9.92M
Options
Listed (FG1OA): 118.7M
Unlisted Options: 50.0M
Unlisted Options: 65.5M
BOARD OF DIRECTORS
Clive Duncan
Non-Executive Chair
Neil Marston
Managing Director and CEO
Sam Garrett
Technical Director
John Forwood
Non-Executive Director
COMPANY SECRETARY
Mathew Watkins
CONTACT
Suite 2, Level 11
385 Bourke Street
Melbourne VIC 3000
info@flynngold.com.au
www.flynngold.com.au
Golden Ridge Project, NE Tasmania
Extensive Shallow Gold Zones in
Brilliant Prospect Drilling
Highlights
• Strong assay results received from the first round of resource
drilling at the Brilliant Prospect, part of Flynn Gold’s 100%-owned
Golden Ridge Gold Project in NE Tasmania.
• Wide intervals of shallow gold mineralisation associated with
sheeted quartz vein zones intersected in the first three diamond
drill-holes, with significant intercepts including:
BRDD017: 18.65m @ 1.86g/t Au from 59.35m, including
3.05m @ 4.65 g/t Au
BRDD015: 20.35m @ 1.29g/t Au from 29.0m, including
3.85m @ 3.12 g/t Au
BRDD016: 14.80m @ 1.26g/t Au from 20.2m, including
1.3m @ 7.70 g/t Au
• The fourth drill-hole (BRDD018) also intersected visual
mineralisation associated with sheeted quartz vein zones, down-
dip of BRDD017 – assays pending.
• The Brilliant drill program forms part of Flynn Gold’s accelerated
project development pathway strategy for Golden Ridge and is
the first of the Golden Ridge Exploration Target prospects to be
advanced toward a maiden Mineral Resource Estimate.
• Drilling and trenching program continuing with assays pending.
• For further information or to post questions, go to the Flynn Gold
Investor Hub at https://flynngold.com.au/link/rAovjy
Flynn Gold Limited (ASX: FG1, “Flynn” or “the Company”) is pleased to
announce the first assay results from its 2026 resource drilling campaign at
the Brilliant Prospect within its 100%-owned Golden Ridge Gold Project in
northeast Tasmania (Figure 6).
Brilliant is the first of the Golden Ridge Exploration Target prospects to be
advanced toward a maiden Mineral Resource Estimate. Planning is also
underway for resource definition drilling at the Trafalgar prospect, as well as
for a larger step-out exploration program to test the highly prospective zone
between the two prospects.
Page 2 of 3 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Managing Director and CEO Neil Marston commented:
“Brilliant may be an appropriate way to describe these early drilling results at our Brilliant
Prospect within the 100%-owned Golden Ridge Project in northeast Tasmania.
“Much of the historical drilling at Brilliant was oriented from the north-western side of the
deposit, effectively drilling sub-parallel to the mineralised zone. In this program we have turned
the rig around and drilled from the south-eastern side with immediate success, consistently
hitting wide zones of shallow gold-bearing mineralisation.
“The first results clearly delineate an extensive mineralised zone which extends to near-surface,
where earlier trenching has recorded similar grades and widths. This program is redefining our
earlier understanding of the Brilliant geological model, so the focus for the next few drill-holes
will be to drill more shallow holes on similar sections across the deposit to confirm our evolving
model.
“Our aim is to announce a maiden Mineral Resource Estimate for the Brilliant Prospect – the
first for the Golden Ridge Project. With further assay results expected later this month we look
forward to making strong progress towards that goal in 2027.”
Brilliant Drilling Results
To date, a total of five diamond drill-holes (BRDD015 to BRDD019) for 704.2m have been
completed at the Brilliant Prospect. Assay results have so far been received for drill-holes
BRDD015, BRDD016 and BRDD017.
These holes are located on section A-A’ (Figure 1) and were designed to test beneath/near
surface around trench BTR02 which returned 33.0m @ 0.56g/t Au, including 11.0m @ 1.04g/t
Au1
. Partial assays have been received for BRDD018 with further assays pending (samples at
the laboratory).
Collar information and significant intercepts are detailed in Table 1 and Table 2.
BRDD015 returned 20.35m @ 1.29g/t Au from 29.0m, including 3.0m @ 2.23g/t Au from
29.0m and 3.85m @ 3.12g/t Au from 41.75m.
Gold mineralisation was also recorded near the top of BRDD015 (9.6m @ 0.33g/t Au from
1.0m, including 1.5m @ 1.08g/t Au from 5.9m). However, poor core recovery occurred in the
near-surface weathered zone (approximately 50% recovery) and lost core intervals have been
assigned zero grade in the reported intercept which means that grades over this interval may
be understated or not fully representative.
BRDD016 returned 14.8m @ 1.26g/t Au from 20.2m, including 1.3m @ 7.70g/t Au from 28.7m,
and 1.9m @ 2.15g/t Au from 24.1m. A second, lower-grade zone of 9.72m @ 0.45g/t Au from
47.0m was also intersected.
BRDD017 returned 18.65m @ 1.86g/t Au from 59.35m, including 3.05m @ 4.65g/t Au from
59.35m and 6.8m @ 2.32g/t Au from 65.0m. A further intercept of 1.9m @ 1.51g/t Au from
122.0m, including 0.94m @ 2.17g/t Au from 122.0m, was intersected deeper in the hole.
1
See FG1 ASX Announcement dated 10 August 2026 for full details.
Page 3 of 4 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Gold mineralisation is associated with sub-vertical sheeted quartz vein swarms hosted in
hornfelsed turbidites of the Mathinna Group (see example in Figure 3). The sheeted veining is
interpreted as extensional vein arrays that repeat within broad, steeply SE-dipping structural
corridors (Figure 1).
Figure 1 – Cross Section A-A’
Page 4 of 5 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Figure 2 – Drill Hole Location Plan
Figure 3 – BRDD017 drill core photograph showing example of sheeted quartz veining
within mineralised interval 18.65m @ 1.86g/t Au from 59.35m. HQ size core.
Page 5 of 6 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Partial assays have been received for the top of BRDD018 with further results (48.8-145.40m)
awaited. BRDD018 intersected visual mineralisation associated with sheeted quartz vein zones
over a down-hole width of approximately 71m (73.5-144.5m), down-dip of BRDD017.
Examples of the sheeted veining in BRDD018 are shown in Figure 4.
The sheeted quartz veining observed in BRDD018 is based on visual geological logging and
does not establish the presence or grade of gold mineralisation. Assay results for the reported
observed veined interval are pending and are required to determine its gold content.
Core is currently being logged and sampled for hole BRDD019, and drilling has commenced
on BRDD020 as show in Figure 2.
Figure 4 – BRDD018 drill core photographs showing examples of sheeted quartz veining
(down-dip of BRDD017) - Assays pending. HQ size core.
Page 6 of 7 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Brilliant Prospect Background
The Brilliant Prospect is part of Flynn’s flagship Golden Ridge Project, located 75km east of
Launceston in northeast Tasmania (Figure 6).
The Brilliant Prospect lies within Mining Lease Application (MLA) 6M/2026, which covers 458
hectares covering the Brilliant and Trafalgar prospects and was lodged with Mineral Resources
Tasmania on 30 June 2026 (FG1 ASX announcement dated 22 July 2026) (Figure 5).
Figure 5 – Golden Ridge Project Geology and Prospect Locations Map showing MLA 6M/2026
Page 7 of 8 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Gold mineralisation at Golden Ridge is interpreted as an intrusion-related gold system (IRGS)
defined by a 9km zone of gold anomalism coincident with the southern intrusive contact of the
Golden Ridge Granodiorite with hornfelsed Mathinna Group metasediments.
Brilliant is the first of the Golden Ridge Exploration Target prospects to be advanced toward a
maiden Mineral Resource Estimate. Planning is also underway for resource definition drilling
at the Trafalgar Prospect, as well as for a larger step-out exploration program to test the highly
prospective zone between the two prospects.
At Brilliant, historical drilling has identified a significant gold occurrence associated with sheeted
and stockwork quartz-carbonate-sulphide veins in hornfelsed Mathinna Bed sediments over
approximately 200m strike length, up to 40m wide and extending to a depth of over 200m.
Mineralisation remains open along strike and down-dip.
Approved by the Board of Flynn Gold Limited.
For more information contact:
Neil Marston
Managing Director & CEO
+61 3 9692 7222
info@flynngold.com.au
Nicholas Read
Media & Investor Relations
+61 (0) 419 929 046
nicholas@readcorporate.com.au
Page 8 of 9 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
About Flynn Gold Limited
Flynn Gold is an Australian mineral exploration company with a portfolio of projects in Tasmania. The
Company has ten 100% owned tenements located in northeast Tasmania which are highly prospective
for gold as well as tin and tungsten (see Figure 6).
The Company also has the Henty silver-lead-zinc project on Tasmania’s mineral-rich west coast and the
Firetower tungsten, gold and critical metals project located in northern Tasmania.
For further information regarding Flynn Gold please visit the ASX platform (ASX: FG1) or the Company’s
website www.flynngold.com.au.
Figure 6 – Northeast Tasmanian - Tenement Location Map
Page 9 of 10 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
In accordance with Listing Rule 5.23.2, the Company confirms in this subsequent public report that it is
not aware of any new information or data that materially affects the information included in any previous
market announcements.
Competent Person Statement
The information in this ASX Announcement that relates to Exploration Results, including historical
Exploration Results, is based on information compiled and reviewed by Mr Sean Westbrook, a
Competent Person who is a Member of the Australian Institute of Geoscientists. Mr Westbrook is a
consultant to Flynn Gold and is a shareholder in Flynn Gold Limited. Mr Westbrook has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration and to
the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves. Mr
Westbrook consents to the inclusion in this announcement of the matters based on his information in the
form and context in which they appear.
Forward Looking and Cautionary Statements
Some statements in this announcement regarding estimates or future events are forward-looking
statements. They include indications of, and guidance on, future earnings, cash flow, costs and financial
performance. Forward-looking statements include, but are not limited to, statements preceded by words
such as “planned”, “expected”, “projected”, “estimated”, “may”, “scheduled”, “intends”, “anticipates”,
“believes”, “potential”, "predict", "foresee", "proposed", "aim", "target", "opportunity", “could”, “nominal”,
“conceptual” and similar expressions. Forward-looking statements, opinions and estimates included in
this report are based on assumptions and contingencies which are subject to change without notice, as
are statements about market and industry trends, which are based on interpretations of current market
conditions. Forward-looking statements are provided as a general guide only and should not be relied
on as a guarantee of future performance. Forward-looking statements may be affected by a range of
variables that could cause actual results to differ from estimated or anticipated results and may cause
the Company’s actual performance and financial results in future periods to materially differ from any
projections of future performance or results expressed or implied by such forward-looking statements.
So, there can be no assurance that actual outcomes will not materially differ from these forward-looking
statements.
References
FG1:ASX Announcement (Prospectus) dated 15 June 2021
FG1:ASX Announcement dated 22 November 2022
FG1:ASX Announcement dated 19 December 2022
FG1:ASX Announcement dated 14 November 2024
FG1:ASX Announcement dated 19 March 2025
FG1:ASX Announcement dated 6 June 2025
FG1:ASX Announcement dated 29 August 2025
FG1: ASX Announcement dated 10 April 2026
FG1: ASX Announcement dated 22 July 2026
FG1: ASX Announcement dated 6 August 2026
FG1: ASX Announcement dated 10 August 2026
Page 10 of 11 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Table 1: Drill Hole Details – Brilliant Prospect, this announcement
Hole ID Easting Northing
RL
(m)
Dip
(°)
Azimuth
(°)
EOH
(m)
Type Status
BRDD015 586027 5415695 530 -60 333 134.7 DD Assays received 0-137.7m
BRDD016 586019 5415705 530 -55 333 109.0 DD Assays received 0-109.0m
BRDD017 586035 5415676 530 -62 330 164.5 DD
Assays received to 0-128m
Assay pending for 147.0-149.0m
Not sampled 128.0-147.0, &
149.4-164.5m
BRDD018 586046 5415653 530 -70 330 182.7 DD
Assays received for 0-48.8m
Assays pending for 48.8-
145.40m
Not sampled 145.4-182.7m
BRDD019 586093 5415712 537 -50 335 113.3 DD
Logging and sampling in-
progress
BRDD020 586100 5415695 536 -65 330 - DD Drilling in-progress
Coordinate projection is MGA94, Zone 55.
Table 2: Drill Hole Significant Mineralised Intercepts – Brilliant Prospect, this
announcement
Hole ID
From
(m)
To (m)
Interval
(m)
Au (g/t) Notes
BRDD015 5.0 10.6 5.6 0.46 Interval includes 2.7m aggregate core loss
including 5.9 7.4 1.5 1.08 Interval includes 0.2m aggregate core loss
BRDD015 29.0 49.35 20.35 1.29
including 29.0 32.0 3.0 2.23
and 41.75 45.6 3.85 3.12
BRDD016 20.2 35.0 14.8 1.26 Interval includes 0.75m aggregate core loss
including 24.1 26.0 1.9 2.15
and 28.7 30.0 1.3 7.70
BRDD016 47.0 56.72 9.72 0.45
BRDD017 59.35 78.0 18.65 1.86
including 59.35 62.4 3.05 4.65
and 65.0 71.8 6.8 2.32
BRDD017 122.0 123.9 1.9 1.51
BRDD018 12.0 15.3 3.3 0.36 Interval includes 1.05m aggregate core loss
Significant intercepts are reported using a 0.3 g/t Au lower cut-off with a maximum of 3m consecutive internal dilution.
Intervals are reported where they are at least 3m in length or at least 1.0 g·m (gram-metres). "Including" intervals
use a 1.0 g/t Au lower cut-off with a maximum of 1m consecutive internal dilution. Grades are length-weighted
averages, and no top-cut has been applied. All intervals are reported as downhole lengths; true widths are not yet
known. Intercepts with significant core loss in the near-surface weathered zone (as recorded in the Notes column of
the significant intercepts table) have been included in the interest of balanced reporting. Lost core intervals have
been assigned zero grade, so grades over these intercepts may be understated or not fully representative and
should be treated with caution.
Page 11 of 13 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
JORC Code Table 1 for Exploration Results
Section 1: Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling
techniques
Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
downhole gamma sondes, or handheld
XRF instruments, etc.). These examples
should not be taken as limiting the broad
meaning of sampling.
Sampling described in this report relates to diamond drill core
sampling of new drill holes BRDD015, BRDD016, and BRDD017.
Half-core samples were collected from HQ sized core over selected
intervals.
Any references to previous diamond drilling results relate to
previously reported data, with corresponding FG1 ASX
announcements cited in the report body.
Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
Diamond core was sampled to geological boundaries with sample
lengths generally between 0.3m and 1.0m.
Samples are considered representative of the mineralised
intervals. All samples were collected by qualified geologists or
under geological supervision.
Aspects of the determination of
mineralisation that are Material to the
Public Report.
The mineralisation referenced in this announcement comprises
broad low- to moderate-grade gold zones. Discrete zones of
higher-grade mineralisation may occur within the broader
mineralised zones.
Drilling
techniques
Drill type (e.g. core, reverse circulation,
open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc.) and details
(e.g. core diameter, triple or standard
tube, depth of diamond tails, face-
sampling bit or other type, whether core
is oriented and if so, by what method,
etc.).
Drilling was completed using triple tube diamond core methods
(HQ for all drill holes) and a standard 3m triple tube core barrel.
The core was oriented using a Boart Longyear Truecore UPIX tool.
Drill sample
recovery
Method of recording and assessing core
and chip sample recoveries and results
assessed.
Length based core recovery was measured from reassembled core
for every drill run. Data was recorded into a digital RQD
spreadsheet which was then uploaded to Flynn Gold’s SQL
database.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Triple tube diamond core drilling techniques are used.
The core recovery is logged for each run of drilling and measured
against the drilled length.
Large diameter PQ size drilling is being implemented from hole
BRDD020 in attempt to improve drill core recovery in the near
surface weathered zone.
Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
No relationship has been noticed between sample recovery and
grade. Intervals containing significant core loss are identified in
the significant interval table, together with the length of core lost.
Lost core has been assigned zero grade for intercept calculations;
however, its actual gold content is unknown, and preferential loss
of mineralised or unmineralised material may affect the
representativity of the recovered samples. These intercepts
should therefore be interpreted with caution
Logging Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
Logging is considered sufficient to support geological
interpretation and future Mineral Resource estimation studies.
Page 12 of 13 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
Logging is qualitative and supported by core photography.
The total length and percentage of the
relevant intersections logged.
All relevant drill core was logged in full.
Subsampling
techniques
and sample
preparation
If core, whether cut or sawn and
whether quarter, half or all core taken.
Core was cut using a core saw and half-core samples collected for
all reported holes.
If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
No non-core drilling samples taken.
For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
The sample preparation technique is considered appropriate for
the style of mineralisation and sample type.
Quality control procedures adopted for
all subsampling stages to maximise
representivity of samples.
Sub-sampling, sample preparation and quality control followed
industry standard procedures.
Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
Half-core sampling is considered appropriate for the style of
mineralisation and is standard industry practice for diamond
drilling programs of this nature.
Sampling representivity is maximised by always taking the same
side of the drill core (whenever orientated) and consistently
drawing a cut line on the core where orientation is not possible.
All competent core was cut with an automated core saw.
Fragmented or broken core was cut using a hand operated saw to
minimise sample loss and maintain representative sampling.
Sampling intervals ranged from 0.3m to 1.0m. Intervals shorter
than 1.0m were used where discrete geological features – such as
large veins, increased mineralisation intensity, faults, or
lithological/alteration/mineralisation boundaries – were present.
The sample sizes are considered appropriate for the nature of
mineralisation.
Coarse rejects and lab-splits of mineralized zones are retained for
potential further QAQC analysis, including check assaying at an
independent laboratory.
Whether sample sizes are appropriate to
the grain size of the material being
sampled.
Sample sizes are considered appropriate for the style of
mineralisation.
Quality of
assay data
and
laboratory
tests
The nature, quality and appropriateness
of the assaying and laboratory
procedures used and whether the
technique is considered partial or total.
Samples were analysed for Au by the Photon Assay method at On
Site Laboratory Services laboratory in Bendigo. The method is
considered total for the style of mineralisation.
QA/QC included insertion of certified reference materials and
blanks at regular intervals. Results demonstrate acceptable
accuracy and precision.
For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations
factors applied and their derivation, etc.
No geophysical tools were used to determine any element
concentrations.
Nature of quality control procedures
adopted (e.g. standards, blanks,
duplicates, external laboratory checks)
and whether acceptable levels of
accuracy (i.e. lack of bias) and precision
have been established.
QA/QC included insertion of certified reference materials, blanks,
and field duplicate samples at regular intervals in accordance with
industry standard practices.
Results demonstrate acceptable accuracy and precision.
Page 13 of 14 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Criteria JORC Code explanation Commentary
Verification
of sampling
and assaying
The verification of significant
intersections by either independent or
alternative company personnel.
Significant intersections have been reviewed by company
personnel and the Competent Person.
The use of twinned holes. No twinned drill holes have been completed.
Documentation of primary data, data
entry procedures, data verification, data
storage (physical and electronic)
protocols.
Assay data was received directly from the laboratory and stored in
a validated electronic database. Original laboratory certificates
are stored separately as pdf files.
Discuss any adjustment to assay data. No adjustments have been made to the assay data.
Location of
data points
Accuracy and quality of surveys used to
locate drillholes (collar and downhole
surveys), trenches, mine workings and
other locations used in Mineral Resource
estimation.
The reported drill collar locations were surveyed using a handheld
Garmin 64ST GPS (accuracy +/- 5m).
Downhole surveys were completed using electronic survey tools
at regular intervals, generally every 30m or less.
Specification of the grid system used. Grid system used is MGA94 Zone 55.
Quality and adequacy of topographic
control.
Survey accuracy is considered adequate for exploration reporting.
High-precision surveys on collar locations will be carried out prior
to mineral resource studies.
Data spacing
and
distribution
Data spacing for reporting of Exploration
Results.
The reporting of new Exploration Results in this announcement
refers to three drill holes (BRDD015, 016 and 017). Thes holes
were drilled along the same section at intervals in the order of 15
to 25m. This spacing is considered appropriate for the stage of
exploration and assessment.
Whether the data spacing and
distribution is sufficient to establish the
degree of geological and grade
continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
No Mineral Resource or Ore Reserve estimates are reported in this
announcement.
Current data spacing (previous and new drilling) is considered
sufficient to demonstrate the presence of mineralisation. The
current drill program has been designed to provide infill and
expansion drilling in order to support future mineral resource
studies.
Whether sample compositing has been
applied.
No compositing has been applied other than length-weighted
averaging in the calculation of significant mineralised intercepts.
Orientation
of data in
relation to
geological
structure
Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
Mineralisation is interpreted to be moderately- to steeply-dipping.
Drill holes orientations are considered appropriate to achieve
unbiased sampling.
If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
No sampling bias is currently identified.
Sample
security
The measures taken to ensure sample
security.
Samples were transported direct to assay laboratories by Flynn
Gold staff under chain-of-custody procedures.
Sample receipt and verification were completed by the laboratory.
Sample tracking is recorded digitally.
Audits or
reviews
The results of any audits or reviews of
sampling techniques and data.
No independent audits or reviews have been completed on the
new reported data in this announcement.
Internal review and data verification is carried out by the
Competent Person. No material issues have been identified.
Page 14 of 16 | ABN 82 644 122 216 | ASX: FG1
Suite 2, Level 11, 385 Bourke Street, Melbourne VIC 3000
info@flynngold.com.au | www.flynngold.com.au
Section 2: Reporting of Exploration Results
Criteria JORC Code explanation Commentary
Mineral
tenement
and land
tenure
status
Type, reference name/number,
location and ownership including
agreements or material issues with
third parties such as joint ventures,
partnerships, overriding royalties,
native title interests, historical sites,
wilderness or national park and
environmental settings.
The Golden Ridge Project covers a total area of 167km2 under a
single exploration licence, EL17/2018.
The licence is owned and controlled by Flynn Gold through its
100% owned subsidiary, Kingfisher Exploration Pty Ltd.
The security of the tenure held at the
time of reporting along with any
known impediments to obtaining a
licence to operate in the area.
Flynn Gold is not aware of any impediments to exploration.
Exploration
done by
other
parties
Acknowledgment and appraisal of
exploration by other parties.
The project has been explored since the 1980s, including mapping,
geochemistry, geophysics and drilling.
The last drilling campaign at the Brilliant prospect was by Flynn
Gold during 2021-2022.
A total of 28 drill holes (~6,792m) have been completed in previous
exploration campaigns at Brilliant. This includes 4 RC holes for
274m.
All historical exploration records are publicly available via the
Tasmanian Government websites including Land Information
System Tasmania (thelist.tas.gov.au).
Previous exploration has been completed on Flynn Gold’s projects
by a variety of companies. Please refer to the FG1 Prospectus
dated 30th March 2021 for details and references relating to
previous work.
Work conducted by previous operators at the Golden Ridge project
is considered to be of a reasonably high quality, and done to
industry standards of the day, with information incorporated into
annual statutory reports.
Geology Deposit type, geological setting and
style of mineralisation.
Vein-hosted gold mineralisation at Golden Ridge is interpreted to
be of the intrusion-related gold system (IRGS) type, comprising
narrow auriferous quartz veins with accessory pyrite, arsenopyrite
and galena.
While the mineralisation often sits within discrete veins, it also
occurs over wider intervals that include stockwork, multiple sub-
parallel vein sets and sheeted veins. Auriferous quartz veins are
sub-vertical to steeply dipping to the south-east and striking
northeast.
Drillhole
information
A summary of all information material
to the understanding of the
exploration results including a
tabulation of the following information
for all Material drillholes:
• easting and northing of the drillhole
co
Share your feedback
Discover