March 2024 Quarterly Activities Report and Appendix 5B
Released
Released
Announcement PDF
ASX Announcement
20 April 2023
ASX: FG1
Quarterly Activities Report
31 March 2024
Highlights
Exploration – Golden Ridge Project, NE Tasmania
•
Assay results from soil sampling completed during the quarter at Golden Ridge identified
new prospect targets and now define anomalous gold in soils over a combined strike
length of at least 9km along the granodiorite contact zone, further enhancing the potential
large scale of the overall Golden Ridge target deposit
•
Infill and extension soil sampling is ongoing across the Golden Ridge project area
•
Initial geological/vein modelling of mineralisation at Trafalgar Prospect indicates the
deposit comprises multiple sub-parallel high-grade veins and associated splays, open
along strike and down dip
•
An initial 1,500m drill program (Phase 3) planned at the Trafalgar prospect comprising infill
and extension drilling targeting down-dip and along-strike extensions to previous highgrade gold intercepts, includes multiple intersections grading >100g/t Au
•
Post quarter, Phase 3 drilling commenced at Trafalgar Prospect
Exploration – Firetower Project, NW Tasmania
•
Final assay results from recent 4-hole diamond drilling program received
•
All holes intersected significant mineralised intervals, with a best result of:
•
2019FTD007E:
o
17.0m @ 2.31g/t Au, 0.16% Co, 0.38% WO3, 0.16% Cu from 121.0, including:
•
1.7m @ 6.64g/t Au, 0.12% Co, 0.87% WO3 and 0.14% Cu from 121m and
•
5.5m @ 3.27g/t Au, 0.24% Co, 0.53% WO3, 0.33% Cu from 132.5m
•
Modelling of updated drilling data indicated key structural controls to polymetallic
mineralisation zones with depth and strike extension target zones recognised
•
Detailed surface mapping and sampling program initiated over priority target areas
Exploration – Parker Dome Project, WA
•
Soil sampling outlined multiple, large-scale lithium anomalies of up to 187ppm Li2O at
the recently optioned Parker Dome project
•
Lithium anomalies extend up to 2,300m length and 900m width
Exploration – Lake Johnston Project, WA
•
Soil sampling outlined a large, high priority lithium anomaly
•
Priority Target 1 presents as a large scale (4km x 1km), strong anomaly with 23 samples
returning assay results over 100ppm Li2O
Page 2 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Corporate
•
Share Purchase Plan and Tranche 2 Placement completed raising $1.1 million
•
Post quarter, one-for-two Renounceable Rights Issue, partially underwritten to $750,000 and
priced at 3 cents per new share announced to raise up to $2.5 million
•
The Company’s cash position at 31 March 2024 was $1.53 million
For further information or to post questions go to the Flynn Gold Investor Hub at
https://investorhub.flynngold.com.au/link/0rJ0Ry
Flynn Gold Limited (ASX: FG1, “Flynn” or “the Company”) is pleased to report on its activities
for the quarter ending 31 March 2024.
Flynn Gold is an Australian mineral exploration company with a portfolio of 100% owned
exploration projects in Tasmania and Western Australia (see Figure 1). The Company has nine
100% owned tenements located in northeast Tasmania which are highly prospective for gold as
well as tin/tungsten. The Company also holds the Henty zinc-lead-silver project on Tasmania’s
mineral-rich west coast and the Firetower gold and battery metals project located in northern
Tasmania.
Flynn has also established a portfolio of gold-lithium exploration assets in the Pilbara and Yilgarn
regions of Western Australia. In addition, Flynn holds a binding Option Agreement to acquire two
exploration licences at Parker Dome, Western Australia.
Figure 1 - Location Plan of Flynn Gold Projects
Page 3 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Gold Exploration –Tasmania
During the March 2024 quarter, the Company’s exploration activities in Tasmania were mostly
focused on the Golden Ridge and Firetower projects (see Figure 2).
Figure 2 - Location of Flynn Gold tenements in Tasmania.
Golden Ridge Project – NE Tasmania
The Golden Ridge Project consists of multiple prospects, soil anomalies and historical gold
workings along a nine-kilometre-long intrusive granodiorite-hornfels metasediment contact zone,
where the Company is actively exploring to identify and test multiple gold exploration targets, with
the aim of making further discoveries.
Previous exploration at the Golden Ridge Project focused on the Brilliant prospect in 2022 and
the Trafalgar prospect more recently, with diamond drilling programs completed at both locations.
In 2022, Flynn completed a regional scout reverse circulation (RC) drilling program at Golden
Ridge.
Page 4 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
The RC program was the first recorded drilling undertaken at the Link Zone, Blinding and
Kensington Prospects. Since then, a two-phase diamond drilling program has been completed at
the Trafalgar prospect, returning significant high-grade results.
The Trafalgar gold deposit is the first location where the intrusive granodiorite-hornfels contact
has been drill tested by Flynn.
Figure 3 - Flynn Gold’s Golden Ridge Project, NE Tasmania, showing prospect areas. Stream sediments,
soil and rock sampling, historical mine locations and drilling have defined a gold anomalous contact
zone of over 9km between the Golden Ridge Granodiorite and enclosing Mathinna metasediments.
Trafalgar Prospect
UltraFine+ Soil Survey
Soil sampling at the Golden Ridge Project has been progressively undertaken, including during
the quarter, since an initial trial using the UltraFine+ technique was initiated in May 2022 1.
1
See FG1 ASX Announcement dated 25 May 2022 for further details.
Page 5 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
The results of this soil sampling have highlighted the known prospect areas, as well as several
new target areas with gold anomalism not associated with historical workings (see Figure 4).
The Golden Ridge UltraFine+ soil sampling program was initially carried out over the Brilliant-Link
Zone-Trafalgar cut grid at 200m line spacings, and then extended northward beyond the Double
Event prospect and westward via step-out roadside reconnaissance transects at 400m to 1km
line spacings. Sample spacing along the lines was 50 metres. By the end of the quarter, 871 soil
samples had been collected and analysed by the Ultrafine+ technique at Golden Ridge. The
collected samples were analysed for 53 elements, including gold and base metals, by LabWest
Minerals Analysis Pty Ltd in Perth using their proprietary UltraFine+ technique.
The sampling program was designed to cover the entire southern and southeastern granitoidmetasediment contact at Golden Ridge to test the effectiveness of the UltraFine+ technique in
identifying areas of gold mineralisation. The UltraFine+ soil sampling results at Golden Ridge
show strong spatial correlation with existing stream sediment and rock sampling data, and also
correlate well with historical soil sampling surveys within the area.
Figure 4 - Gold in Soils (Ultrafine+) over Golden Ridge Regional Geology
Page 6 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Anomalous gold and arsenic in soils was successfully detected in coherent anomalies over
advanced prospect areas where drilling has confirmed in-situ gold mineralisation, including at the
Trafalgar, Brilliant, Link Zone, Blinding and Kensington prospect areas (see Figures 5 and 6).
Multiple new areas of anomalous gold in soils have been identified for follow-up exploration,
including the newly named (see Figure 5):
•
•
•
Grenadier prospect, located at the western end of the granodiorite-metasediment contact
zone;
Duke prospect, located fully within the interpreted granodiorite intrusive, and
Big Penny prospect, which is located within the metasediments approximately 1,500m
north of the major gold in soils anomaly at the Trafalgar prospect.
The granodiorite-metasediment contact zone soil anomaly remains open along trend beyond the
Grenadier and Big Penny prospects, significantly extending FG1’s target.
The general findings confirm the UltraFine+ technique to be an effective first pass exploration tool
at Golden Ridge where outcrop is often obscured by transported scree slope cover. Infill and
extension sampling programs are underway at Golden Ridge and the method is also being
deployed at some of Flynn’s other project areas in northeast Tasmania.
Figure 5 - Gold in Soils (Ultrafine+) Heat Map
Page 7 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Figure 6 - Arsenic in Soils (Ultrafine+) Heat Map
Geological Vein Model
During the quarter, the Company completed an updated 3D geological vein model for the
Trafalgar prospect. The model interprets 3 main gold mineralised veins, accompanied by a
network of subsidiary mineralised splay veins and sheeted vein swarms bifurcating off the main
veins
All of the main mineralised veins transect the granodiorite – hornfelsed metasediments contact,
with gold mineralisation hosted in both the granodiorite and metasediment host rocks.
Of the three main veins, the “Trafalgar Main” vein is the highest grade and most dominant. The
other two main veins are the “Magazine” vein and “Trafalgar South” vein. These strike subparallel/oblique to the Trafalgar Vein and are currently interpreted to terminate against the
Trafalgar Main vein hanging wall at depth.
The plunging intersection zones of the Magazine and Trafalgar South veins with the Trafalgar
Main vein are target areas for potential high-grade ore “shoots”.
Multiple splay veins and sheeted vein arrays have been modelled to capture mineralised vein
zones of varying gold grades, widths and orientations that accompany the main veins.
Page 8 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Figure 7 – Trafalgar Prospect Vein Model Plan View.
Trafalgar Main Vein
The Trafalgar Main vein strikes ENE and dips steeply to the southeast. It is currently drill-defined
over a strike length of approximately 325m and a vertical depth of approximately 280m (open)
below surface. The vein remains open along strike to the east and west and at depth. High-grade
mineralised intercepts from previous drilling on the Trafalgar Main vein include:
TFD001:
•
5.0m @ 12.56g/t Au, including 0.4m @ 150.0g/t Au from 202.0m
TFDD003:
•
1.2m @ 65.9g/t Au, including 0.5m @ 143.0g/t Au from 57.5m
TFDD013:
•
4.0m @ 23.7g/t Au, including 0.5m @ 169.8g/t Au from 25.9m, and
TFDD015:
•
1.1m @ 51.3g/t Au, including 0.4m @ 137.8g/t Au from 353.9m 2
See FG1 ASX Announcements dated 24 October 22, 12 December 22, 19 January 23, 14 September 23 and 10 October 2023 for
full details
2
Page 9 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
The Trafalgar Main vein was worked historically by small-scale underground mining for a brief
period during the late 1800’s. It is understood that underground mining by limited shaft and drive
development reached a depth of 60m below surface. The only known production from the
workings is recorded as approximately 46 tonnes grading about 137g/t Au.
Magazine Vein
The Magazine vein is currently drilled defined over a strike length of approximately 300m and to
a vertical depth of approximately 180m (open) below surface. It is interpreted to terminate against
the Trafalgar Main vein approximately 150m east of drillhole TFDD013 but remains open to the
west and down-plunge to the southwest. High-grade mineralised intercepts from previous drilling
on the Magazine vein include:
TFDD005:
•
12.3m @ 16.8g/t Au from 108.7m, including 0.85m @ 72.0g/t Au from 111.75m; and
0.7m @ 152.5g/t Au from 120.3m
TFDD005B:
•
14.7m @ 5.52g/t Au from 109.4m, including 0.9m @ 109.0g/t Au from 121.8m
TFDD011:
•
2.1m @ 8.28g/t Au from 111.9m, including 1.3m @ 11.86g/t Au from 111.9m
TFDD004:
•
3.85m @ 3.24g/t Au from 186.15m, including 0.4m @ 28.1g/t Au from 187.1m
Trafalgar South Vein
The Trafalgar South vein is currently drill-defined over a strike length of approximately 290m and
to a vertical depth of approximately 380m (open) below surface. It is interpreted to terminate
against the Trafalgar Main vein approximately 250 to 300m east of drillhole TFDD0013 but
remains open to the west and down-plunge to the southwest. High-grade mineralised intercepts
from previous drilling on the Trafalgar South vein include:
TFDD002:
•
5.4m @ 10.63g/t Au from 160.1m, including 1.9m @ 19.88g/t Au from 160.1m and 2.0m
@ 9.02g/t Au from 163.5m
TFDD008:
•
4.0m @ 3.15g/t Au from 166.1m, including 1.0m @ 10.75g/t Au from 166.1m
TFDD015:
•
1.6m @ 8.56g/t Au from 191.7m, including 0.8m @ 13.95g/t Au from 191.7m; and
•
2.45m @ 5.10g/t Au from 204.55m, including 0.55m @ 20.22g/t Au from 205.2m
Page 10 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Phase 3 Drilling
In April 2024, Phase 3 drilling commenced at the Trafalgar prospect.
The planned 1,500 metre diamond drill program will initially comprise infill and extension drilling
targeting down-dip and along-strike extensions to previously drilled high-grade gold intercepts.
Initial holes are designed as infill and close-spaced step-outs around the previous wide-spaced
drilling (100m average drill hole spacing) and will be used to test and refine the current vein model
and inform targeting of further step-out strike and depth extension drilling.
The first hole, TFDD016, with a planned depth of 320m is designed to test all 3 of the main veins
(Trafalgar Main, Magazine, and Trafalgar South veins) as well as multiple splay veins and will be
an important first test of the interpreted vein model at Trafalgar in a zone of widely spaced
previous drilling (see Figure 3).
Figure 8 – Trafalgar Prospect Vein Model Cross Section showing planned drillhole TFDD016.
Page 11 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Firetower Project
The Firetower Project (EL26/2004) is located in northwest Tasmania, Australia, and covers an
area of 62 square kilometres. The project lies in the eastern parts of the highly mineralised Mt
Read volcanic sequence which hosts major polymetallic base metals and gold deposits such as
Hellyer and Rosebery, copper-gold deposits such as Mt Lyell (3Mt contained copper, 3.1Moz
contained gold), and the Henty gold mine (1.64Moz Au @ 12.5g/t Au) (see Figure 2).
Polymetallic Au-Co-W-Cu mineralisation at the Firetower prospect is currently defined by historic
drilling over a strike length of 250m within a highly prospective 6km-long trend between the
Firetower West and Firetower East prospects (Figure 9). The mineralisation, which partly
outcrops, is currently drill-tested to approximately 150m depth and remains open down-plunge.
Anomalous cobalt and tungsten was noted by previous explorers but generally not followed up
due to the gold-focused exploration models applied at the time.
The Firetower Project is relatively unusual in that there are few known gold-cobalt-tungstencopper deposits globally.
Figure 9 - Firetower Project Geology and Gold Prospects
Page 12 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
During the quarter Flynn Gold announced assay results following completion of 496m of diamond
drilling at the Firetower prospect in December 2023 with extension tails to three historical diamond
holes and one new hole drilled.
The short drill program was designed to test for depth/strike extensions to historically drilled
polymetallic (Au-Co-W-Cu) mineralisation, and to provide stratigraphic and structural information
to assist geological evaluation of controls to high-grade mineralisation.
Intersections reported were highly encouraging.
Extension drill hole 2019FTD007E was drilled for 83.2m from 98.7m – 181.9m, intersecting the
thickest down-hole zone of polymetallic mineralisation ever drilled at Firetower, with:
•
17m @ 2.31g/t Au, 0.16% Co, 0.38% WO3 and 0.16% Cu from 121m; including:
o
1.7m @ 6.64g/t Au, 0.12% Co, 0.87% WO3 and 0.14% Cu from 121m and
o
5.5m @ 3.27g/t Au, 0.24% Co, 0.53% WO3 and 0.33% Cu from 132.5m.
Extension drill hole 2019FTD004E was drilled for 121.1m from 106m – 227.1m. Highlights from
this extended hole include:
•
9.1m @ 0.85g/t Au, 0.1% Co, 0.09% WO3 and 0.15% Cu, from 111.9m, including
o
2.4m @ 1.7g/t Au, 0.15% Co, 0.26% WO3 and 0.19% Cu from 118.6m.
Extension drill hole 2019FTD005E was drilled for 76.9m from 120.5m – 197.4m. Best intercept in
the hole was:
•
2.4m @ 1.37g/t Au, 0.15% Co, 0.35% WO3, 0.04% Cu from 141.0m.
Hole FT-2023-001, drilled from surface to a down-hole depth of 214.8m, intercepted a best
polymetallic intercept associated with a discrete zone of chalcopyrite-rich sulphide breccia veining
of:
•
0.75m @ 5.33g/t Au, 2.65% Cu, 0.005% Co, 0.05% WO3 from 159.75m.
Firetower Geological Modelling
During the quarter Flynn commenced modelling of updated drill hole structural and stratigraphic
data (including 3D modelling) to evaluate controls to the high-grade polymetallic Au-Co-W-Cu
mineralisation at Firetower and optimise targets for potential follow-up drilling.
Preliminary outcomes of the modelling include:
•
The main stratigraphic host rock to Au-Co-W-Cu mineralisation comprises a sequence of
interbedded volcaniclastic tuff, sandstone and siltstone-shale units which trends E-W to
WNW-ESE across the prospect area and dips sub-vertically.
•
A series of NW-trending, moderately dipping fault zones transect and offset the
mineralised host sequence (Figure 10).
•
The central fault, referred to as the Eureka Fault, divides currently known mineralisation
into two domains – the Eureka East Zone (EEZ) in the hangingwall to the Eureka Fault,
and the Eureka West Zone (EWZ) in the footwall (Figure 10).
Page 13 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
•
Polymetallic Au-Co-W-Cu mineralisation appears to be best developed in the EEZ,
forming SE-plunging zones related to intersection of the mineralised host sequence with
the Eureka Fault zone (see Figure 11).
•
Recent drill holes 2019FTD004E, 2019FTD005E and FT-2023-001 are now understood
to have all drilled into the EWZ in the immediate footwall of the Eureka Fault. Offset of the
host stratigraphy and mineralisation zones across this fault is interpreted to account for
the thinner zones of mineralisation intercepted in these holes.
•
2019FTD007E was drilled into the hanging wall block (EEZ) of the Eureka Fault and
successfully intercepted the interpreted down-plunge continuation of the 2019FTD006
mineralised zone (see Figure 11).
Figure 10 - Firetower Prospect Drill Hole Plan
Eureka East Zone (EEZ)
Drill results to date indicate the thickest and highest-grade mineralisation is interpreted to form in
the hangingwall of the NW-trending Eureka Fault – the Eureka East Zone. Mineralisation in the
EEZ trends WNW over 150m of strike length, dipping sub-vertical to the SSW. Intersection of the
host sequence with the moderately NE-dipping Eureka Fault zone is interpreted to result in the
formation of ESE-plunging high-grade polymetallic mineralised zones within the EEZ.
Page 14 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Down-plunge continuation of coherent mineralisation zones is currently drill defined over 150m in
the down-plunge direction.
Examples of significant mineralised drillhole intercepts in the EEZ are listed in Table 1 below, with
highlighted intervals also shown in Figure 11. The potential for down-plunge continuation of
mineralisation in the EEZ is under review and is likely to require confirmation drilling.
Deep historical drill holes FTD041 and FTD042 (see Figure 11), drilled at unfavourable angles to
the host sequence, are interpreted as possible near-misses. FTD041 intersected a weakly
mineralised zone (with no Co assays) in the projected down-plunge footwall zone to the Eureka
Fault.
Eureka West Zone (EWZ)
Modelling of drilling data suggests that drilling in the EWZ to date is relatively wide spaced with
few holes having tested the upper part of the mineralised host sequence. Multiple high-grade gold
and polymetallic intercepts are recognised within the EWZ and are currently being assessed as
part of the model.
Figure 11 - Preliminary 3D model of the Firetower prospect (looking south), showing recent and
historical drilling with selected significant polymetallic mineralised intercepts,
>1g/t Au grade shell (yellow), and Eureka Fault plane (grey).
Page 15 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Hole ID
From (m)
To (m)
Interval (m)
Au g/t
Co %
WO3 %
Cu %
FTD005
FTD008
and
FTD013
FTD026
and
2019FTD001
and
2019FTD006
including
2019FTD007E
Including
55.0
88.0
92.0
33.0
52.0
57.6
34.0
45.0
99.0
105.0
121
132.5
66.0
89.0
95.0
47.0
53.0
59.0
37.0
54.5
108.0
108.0
138
138
11.0
1.0
3.0
14.0
1.0
1.4
3.0
9.5
9.0
3.0
17
5.5
4.00
10.80
5.48
2.91
5.68
8.57
3.97
3.30
2.56
8.59
2.31
3.27
0.05
0.01
0.15
0.14
0.22
0.12
0.01
0.02
0.25
0.29
0.16
0.24
0.24
0.49
0.53
0.24
0.48
0.13
0.19
0.12
0.32
0.83
0.38
0.53
0.25
0.05
0.05
0.25
0.06
0.22
0.11
0.15
0.10
0.21
0.16
0.33
Table 1 - Best significant mineralised drill hole intercepts in the Eureka East Zone
Figure 12 - Preliminary 3D model of the Firetower prospect (looking south), showing recent and
historical drilling with selected significant polymetallic mineralised intercepts,
Note: anomalous dispersion halo in soils down-slope of the mineralised host sequenced.
Page 16 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Firetower Upside Exploration Potential
Interpreted off-set strike extensions of the mineralised host sequence at the Firetower prospect
are coincident with zones of anomalous gold and other pathfinder elements in historical surface
rock and soil sampling (see Figure 12). The anomalous surface geochemistry extends up to 250m
both east and west outside of the area of main Firetower drilling areas to date. Detailed surface
mapping and sampling has commenced to further evaluate the exploration potential of these
extension target areas.
The results of the Company’s first drilling campaign at Firetower are considered highly
encouraging and warrant further exploration activities to further advance the prospect.
Compilation of drilling results and geological modelling is in progress to provide insight to controls
and distribution of the high-grade polymetallic mineralisation as well as to optimise targets for
potential future drill testing.
A field mapping and sampling campaign has commenced over the Firetower prospect and will be
expanded to cover the wider project, including the Firetower West and Firetower East prospect
areas. Results obtained from the field program will enhance the ongoing geological study and
exploration targeting at the Firetower Project.
Warrentinna Project
The Warrentinna Project (EL30/2004) is located in northeast Tasmania, 40km northwest of
Flynn’s Golden Ridge Project (see Figure 2). The tenement was acquired from Greatland Gold
plc (LSE: GGP, “Greatland”) in June 2023 3.
In late 2023, two diamond holes were drilled at the Derby North Prospect. The holes have
confirmed the continuity of orogenic style gold mineralisation identified in historical drilling.
Gold mineralisation at Warrentinna occurs in multiple sub-parallel lode style quartz veins. Veins
strike north to north-northeast and are steeply dipping to the east and west.
A review of the results of the 2023 drill program was ongoing during the quarter and will lead to
refinement of the geological model and preparation of a preliminary mineral resource model. This
work will be used to identify the best locations for follow-up drilling.
Other Tasmanian Exploration Activity
Henty Zinc Project
The Henty Zinc-Lead-Silver Project comprises a district-scale stratiform carbonate-hosted base
metal system hosting 5 mineralised stratigraphic horizons identified over +50 km of combined
strike length. Mineralisation is identified from surface to known depths of +500m (open) 4.
Located within 5km of the historic mining town of Zeehan, the project has excellent access to
road, rail, power and port infrastructure.
No field was undertaken at Henty during the quarter.
3 See FG1 ASX Announcement dated 5 June 2023
4 See FG1 ASX Announcements dated 14 August 2023 for full details
Page 17 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
WA Gold-Lithium Projects
Flynn has gold-lithium projects in Western Australia, strategically located in districts that host
large gold and lithium deposits or in districts that the Company considers relatively under-explored
for lithium.
Lake Johnston Lithium Project
During the quarter, Flynn announced that assay results from first-pass soil sampling completed
in late 2023 had identified a large, high priority lithium target at its Lake Johnston Lithium Project.
The Lake Johnston project is located in the highly prospective Lake Johnston greenstone belt,
which hosts the Mt Day pegmatite field and multiple active exploration targets including the
Medcalf pegmatites. Flynn’s target is located 11km southeast of the Burmeister lithium pegmatite
discovery held by TG Metals Limited (ASX:TG6) and just 5km southeast of the Mt Gordon
Prospect held by Charger Metals NL (ASX:CHR) (see Figure 13).
Pegmatites were identified at the project on E63/2190 during an initial reconnaissance field trip
in 2023. This soil sampling program was designed to provide first-pass geochemical coverage
over this main trend.
Figure 13 - Location of Flynn’s Lake Johnston project, other explorers’ holdings and new soil lithium
targets
Page 18 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Recent nearby discoveries at the Burmeister, Jaegermeister and Mt Gordon lithium prospects
indicate that soil values of interest, when targeting pegmatites in the Lake Johnston region, are
generally considered to be greater than 100ppm Li2O (see Figure 14).
The results from the soil geochemistry program at Lake Johnston have outlined three substantial
lithium soil anomalies, including one large-scale (4km x 1km), high priority, lithium anomaly with
supporting associated pathfinder geochemistry (Priority Target 1, Figure 14). The Priority Target
1 occurs in an area of shallow transported sheetwash alluvium overlying a thick sequence of highmagnesium and tholeiitic basalts, lithologies considered favourable to host pegmatites.
Figure 14 - Flynn Gold Limited’s tenement E63/2190 showing lithium
pegmatite targets over combined aeromagnetic and gravity image
Page 19 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Flynn’s exploration licences at Lake Johnston were granted in July 2023 and during an initial
reconnaissance field trip, three previously unmapped pegmatite outcrops were successfully
identified on E63/2190. Flynn’s Priority Target 1 contains twenty-three soil sample results over
100ppm Li2O (with a maximum value of 136.9ppm Li2O) (see Figure 15).
In addition to the Priority Target 1, the soil sampling program has subsequently outlined a 2km
long by 400m wide lithium anomaly (Target 2) in the vicinity of the mapped pegmatites A third
lithium soil anomaly is located in the northwest portion of the tenement (Figure 15).
The soil program was not fully completed due to time constraints at the end of the year, leaving
some gaps with lines unfinished or incomplete. Extensional and infill soil sampling will be required
to close off the anomalies (see Figure 15).
Figure 15 - Soil lithium results (Li2O ppm) over magnetic image showing targets and Li2O contours
Page 20 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au | www.flynngold.com.au
Parker Dome Lithium Project
During the quarter, the Company announced results from its soil sampling program at the Parker
Dome lithium-gold project, situated in the highly prospective Forrestania Belt in Western Australia.
The licences are located 50km north of the world class Mount Holland lithium project and 20km
north-east of the Rio lithium deposit held by Zenith Minerals Limited (ASX: ZNC) (see Figure 16).
The soil sampling program was designed to provide first-pass geochemical coverage over the
licences, delivering the first systematic lithium and associated pathfinder assays for the project.
Figure 16 - Location of Flynn’s Forrestania and Parker Dome projects
Page 21 of 25 | ABN 82 644 122 216 | ASX: FG1
Level 4, 96-100 Albert Road, South Melbourne, Victoria, 3205
info@flynngold.com.au
Share your feedback
Discover